Author | Topic |

I Supported Toymods
Location: Sydney
Registered: December 2002
|
Do you think this engine will fit in my hachi roku?
|
Wed, 08 September 2004 12:42
|
 |

Crankshaft and flywheel

Selecting appropriate bearing sizes

ARP Head Studs?

So do you reckon it'll fit into my Hachi Roku???
DU Sulzer 12RTA96C Specs:
Bore & Stroke - 965mm x 2489mm
Max power output @ 100RPM - 66,844kW
kW per cylinder - 5720
Maximum cylinder pressure - 145bar
Fuel consumption - 171-163 gallons/kWh
|
|
|

Location: perth WA
Registered: June 2004
|
Re: Do you think this engine will fit in my hachi roku?
|
Wed, 08 September 2004 12:45

|
 |
I think you may have to mid mount it
Cheers
Jeff
|
|
|

I Supported Toymods
Location: Sydney
Registered: December 2002
|
Re: Do you think this engine will fit in my hachi roku?
|
Wed, 08 September 2004 12:47

|
 |
Where do you reckon the MR2 gearbox and lsd diff would hold up to it???
|
|
|

I Supported Toymods
Location: Sydney
Registered: December 2002
|
Re: Do you think this engine will fit in my hachi roku?
|
Wed, 08 September 2004 12:54

|
 |

Pistons and rods

The pistons have oil galleries running through them to improve lubrication and heat distribution.

Heres the pistons with the galleries installed.
|
|
|

Location: perth WA
Registered: June 2004
|
|
|

I Supported Toymods
Location: Sydney
Registered: December 2002
|
Re: Do you think this engine will fit in my hachi roku?
|
Wed, 08 September 2004 12:59

|
 |
stumpy wrote on Wed, 08 September 2004 22:56 | Not sure on that one, but you may also need to upgrade you suspension a bit. My personal choice would be Monroe touring gas shocks and some heavy duty pedders springs.
Seriously, is that a generator or a boat engine?
Cheers
Jeff
|
It's a diesel boat engine... but it looks awesome!
|
|
|

Location: perth WA
Registered: June 2004
|
Re: Do you think this engine will fit in my hachi roku?
|
Wed, 08 September 2004 13:04

|
 |
Totally, Its just mind blowing the amount of work that goes into it, and thats just putting it together not counting the machining.
Cheers
Jeff
|
|
|

Location: Sydney
Registered: September 2003
|
Re: Do you think this engine will fit in my hachi roku?
|
Wed, 08 September 2004 13:25

|
 |
I think that the real question is will you need a panda paint job, or a monster tacho to handle the power.
also out of curiosity what difference will a pod filter make with a 5zigen sticker on the rear bumper?
|
|
|

Location: Sydney
Registered: May 2003
|
Re: Do you think this engine will fit in my hachi roku?
|
Wed, 08 September 2004 14:29

|
 |
question is
ive only got $172.35
can i get it imported complied and installed for that price ?
|
|
|

Location: Ballarat, Victoria
Registered: March 2003
|
Re: Do you think this engine will fit in my hachi roku?
|
Wed, 08 September 2004 14:35

|
 |
you could stick glass on the top and make one hell of a coffee table
something for the evangelions to sit at
|
|
|

Location: 1st street on the right
Registered: November 2002
|
Re: Do you think this engine will fit in my hachi roku?
|
Wed, 08 September 2004 22:03
|
 |
Looks from memory like a 2 stroke diesel ship engine with a Cu inch capacity measuered in the 100,000's. There was a link here a while ago to lots of pics of korean guys standing in the bearing journals etc.

It would be a sulzer RTA96c 14cyl 108,920 Bhp. Thats 81,254 Kw for you modern kiddies.
|
|
|