| Author | Topic |
|---|
Location:
adelaide
Registered:
May 2004
|
|
Recomended exhaust size for 3tgte
|
Wed, 15 September 2004 09:21
|
 |
Hey peoples, i just got an import TT142 GTT corona with a 3tgte and im wondering what size exaust should i get? its gonna be my daily driver so i can continue with my other car.
also any recomendations on little bits and pieces to get a little bit more get up and go from it. remember the car is completely stock so any help would be usefull.
cheers
mat
|
|
|
Location:
brisbane
Registered:
August 2004
|
|
Re: Recomended exhaust size for 3tgte
|
Wed, 15 September 2004 09:46
|
|
|
2.5inch will be plenty
|
|
|
Registered:
August 2004
|
|
Re: Recomended exhaust size for 3tgte
|
Sat, 18 September 2004 00:34
|
|
|
use a3inch from the turbo others will restict it
|
|
|
Registered:
August 2004
|
|
Re: Recomended exhaust size for 3tgte
|
Sat, 18 September 2004 00:37
|
|
 do u have a blow off and run a pod what killawatts were u told it will have at the wheels it will crank out about 88 stok
|
|
|
I supported Toymods
Location:
Perth, Western Australia
Registered:
December 2002
|
|
Re: Recomended exhaust size for 3tgte
|
Sat, 18 September 2004 02:27
|
|
|
Having had a 3" mandrel bent exhaust on a 3TGTE, I would never have one again for a street car - they drone too much and adding resonators defeats the purpose of having the increased size. I would recommend a mandrel bent 2.5" system with a good muffler at the back, for improved sound levels. you might also like to consider keeping the dump pipe 3" and then dropping back to 2.5" for the exhaust - as the gas cools down, it will require less space.
|
|
|
Location:
Hobart, Tas
Registered:
May 2002
|
|
Re: Recomended exhaust size for 3tgte
|
Sun, 19 September 2004 07:34
|
|
|
Interesting. Sorry to thread hijack, but for comparison what size do people recommend behind a 1GGTE?
|
|
|
I supported Toymods
Location:
Perth, Western Australia
Registered:
December 2002
|
|
Re: Recomended exhaust size for 3tgte
|
Sun, 19 September 2004 13:03
|
|
|
I'd recommend the same setup. You could put a 3" system on it, but you'd still need to choke it up with resonators to eliminate the drone.
|
|
|
