| Author | Topic |
|---|
Location:
Ballarat
Registered:
September 2003
|
|
2tg hot cams&other stuff CAM SHEET ADDED :)
|
Thu, 07 October 2004 12:09
|
 |
I have a twin set of 2tg cams with high profile specs. Profile 1405C Bucket/SVale 2tg DOHC
make an offer....the specs are as follows:
(Cam Lift) (Duration Adv) (Duration@50)
Intake 414 286 242
Exhaust 414 286 242
I have a full set of specs, with timing adv and so forth, they were done by Wade Camshafts Pty Ltd, so if anyone wants i will post a picture of the cams and the official cam spec sheet. btw not that it really matters but i drove with these cams for about 2 blocks.
k also have a 3t block suitable for an overbore, only minor bore scratching, u could use it without boring but yeah.
4ag exhaust manifold.
if anyone needs stuff from a 2tg head, i dunno, ask me, and ill see if i have it....
[Updated on: Wed, 13 October 2004 07:03]
|
|
|
Location:
Dandenong Ranges, VIC
Registered:
July 2004
|
|
Re: 2tg hot cams&other stuff
|
Thu, 07 October 2004 12:23
|
|
can you put up that cam spec sheet and pics? might be interested
cheers.
Jim
|
|
|
Location:
Ballarat
Registered:
September 2003
|
|
Re: 2tg hot cams&other stuff
|
Fri, 08 October 2004 01:20
|
|
|
ill hafta put them up on monday coz my mate with the digital camera and the scanner has gone to bathurst for the weekend....that ok mate?
|
|
|
Location:
Dandenong Ranges, VIC
Registered:
July 2004
|
|
Re: 2tg hot cams&other stuff
|
Fri, 08 October 2004 09:06
|
|
|
no worries
|
|
|
Location:
cronulla
Registered:
March 2003
|
|
Re: 2tg hot cams&other stuff
|
Tue, 12 October 2004 03:34
|
|
timing chain guide looking at front of motor top left hand side has a tensioner screws onto it through the side of the head if conditon is good very interested
|
|
|
Location:
Ballarat
Registered:
September 2003
|
|
Re: 2tg hot cams&other stuff
|
Tue, 12 October 2004 05:59
|
|
sorry mate i only have one of them, and it was one i had to make myself :s it works fine tho...
btw, ryleys scanner isnt working so sorry bout the lack of the cam card atm, i will try to get it on tonight..
|
|
|
Location:
Ballarat
Registered:
September 2003
|
|
Re: 2tg hot cams&other stuff CAM SHEET ADDED :)
|
Wed, 13 October 2004 07:06
|
|
|
thankyou to ryley for his computer skills
|
|
|
Location:
Ballarat
Registered:
September 2003
|
|
Re: 2tg hot cams&other stuff CAM SHEET ADDED :)
|
Thu, 14 October 2004 12:57
|
|
bump in disguise
|
|
|
Location:
Canberra
Registered:
March 2003
|
|
Re: 2tg hot cams&other stuff CAM SHEET ADDED :)
|
Tue, 19 October 2004 09:58
|
|
Hey Grant
Can you post pics of the cams, pls...
How come you're not using these yourself?
You have a PM...
|
|
|
Location:
Adelaide, Semaphore
Registered:
September 2004
|
|
|
Location:
Ballarat
Registered:
September 2003
|
|
Re: 2tg hot cams&other stuff CAM SHEET ADDED :)
|
Mon, 25 October 2004 07:45
|
|
what, you want me to donate the cams to the project?  if thats the case...im doing a project myself...
|
|
|
Location:
Adelaide, Semaphore
Registered:
September 2004
|
|
Re: 2tg hot cams&other stuff CAM SHEET ADDED :)
|
Tue, 26 October 2004 04:29
|
|
Hey, I wont turn my nose up at your free cams at all, so long as you include freight and the data sheets as well... Once I have this project well under way which will be starting from the 17th November, you will be wishing that the you sent an engine to go with cams  ....
For that matter, can you donate anything.... My nose will not snub even the smallest of things... ie bolts, clutch, gearbox, diff, leaf springs, manifold, loom, computer... the list goes on, but it will be recognised in the tech manual who the donations came from, unless you have something that "fell off the back of a truck" and want to stay anonamous... In that case, I don't want it. 
|
|
|
Location:
Ballarat
Registered:
September 2003
|
|
Re: 2tg hot cams&other stuff CAM SHEET ADDED :)
|
Tue, 26 October 2004 04:37
|
|
yerr. theyre sold mate, ill write a tech article on my own rebuild 
|
|
|
Location:
Adelaide, Semaphore
Registered:
September 2004
|
|
Re: 2tg hot cams&other stuff CAM SHEET ADDED :)
|
Tue, 26 October 2004 04:45
|
|
Another tech article? tech article wars I can see... your just jealous... Just kiddin, The more tech articles the better I say, you can never have enough info on conversions. I look forward to printing yours out on my toilet paper 
|
|
|
Location:
Dandenong Ranges, VIC
Registered:
July 2004
|
|
Re: 2tg hot cams&other stuff CAM SHEET ADDED :)
|
Tue, 26 October 2004 09:50
|
|
|
Man, are you serious?
|
|
|
Location:
Ballarat
Registered:
September 2003
|
|
Re: 2tg hot cams&other stuff CAM SHEET ADDED :)
|
Tue, 26 October 2004 11:31
|
|
| cwhelan wrote on Tue, 26 October 2004 14:45 |
Another tech article? tech article wars I can see... your just jealous... Just kiddin, The more tech articles the better I say, you can never have enough info on conversions. I look forward to printing yours out on my toilet paper
|
good luck getting free parts off everyone for your conversion, fuckwit.
|
|
|
Location:
Adelaide, Semaphore
Registered:
September 2004
|
|
Re: 2tg hot cams&other stuff CAM SHEET ADDED :)
|
Wed, 27 October 2004 22:06
|
|
| greenta22 wrote on Tue, 26 October 2004 19:50 |
Man, are you serious?
|
Am I serious about the tech article... Yes
Am I serious about wanting everything for free... No
am I serious about printing off an "untouchable" tech article on toilet paper..... Hmmmm that all depends if it will even be written!! Me thinks it won't.
|
|
|
Location:
Ballarat, Victoria
Registered:
March 2003
|
|
Re: 2tg hot cams&other stuff CAM SHEET ADDED :)
|
Thu, 28 October 2004 03:09
|
|
| cwhelan wrote on Thu, 28 October 2004 08:06 |
| greenta22 wrote on Tue, 26 October 2004 19:50 |
Man, are you serious?
|
Am I serious about the tech article... Yes
Am I serious about wanting everything for free... No
am I serious about printing off an "untouchable" tech article on toilet paper..... Hmmmm that all depends if it will even be written!! Me thinks it won't.
|
|
|
|
Location:
Adelaide, Semaphore
Registered:
September 2004
|
|
Re: 2tg hot cams&other stuff CAM SHEET ADDED :)
|
Thu, 28 October 2004 03:24
|
|
Bugger me....
I wish I could see what that was, our server is so damn strict and won't let me see links of other sites. If it is a pic maybe you could paste instead. Otherwise, might just have to wait till tonight when I get home to see it...
Caio
|
|
|
Location:
Ballarat
Registered:
September 2003
|
|
Re: 2tg hot cams&other stuff CAM SHEET ADDED :)
|
Thu, 28 October 2004 04:14
|
|
|
its sassy, its hip, its happening, i thinks its you.
|
|
|
Location:
Adelaide, Semaphore
Registered:
September 2004
|
|
Re: 2tg hot cams&other stuff CAM SHEET ADDED :)
|
Thu, 28 October 2004 04:17
|
|
|
hahaha, now your just teasing me.... I'm gonna try find someone with full access to the net and see what it is...
|
|
|
Location:
Adelaide, Semaphore
Registered:
September 2004
|
|
Re: 2tg hot cams&other stuff CAM SHEET ADDED :)
|
Thu, 28 October 2004 04:25
|
|
|
Ha!!!! Your the swine thats been sneakin around the house at night and peepin in the windows, how else would you know is my Question
|
|
|
Location:
Ballarat
Registered:
September 2003
|
|
Re: 2tg hot cams&other stuff CAM SHEET ADDED :)
|
Thu, 28 October 2004 10:08
|
|
|
i hate you
|
|
|
Location:
Dandenong Ranges, VIC
Registered:
July 2004
|
|
Re: 2tg hot cams&other stuff CAM SHEET ADDED :)
|
Thu, 28 October 2004 10:21
|
|
| Quote: |
might just have to wait till tonight when I get home to see it...
|
Hehe see your what, sorry?
|
|
|
Location:
Adelaide, Semaphore
Registered:
September 2004
|
|
Re: 2tg hot cams&other stuff CAM SHEET ADDED :)
|
Thu, 28 October 2004 21:48
|
|
Why do you hate me? I've not done nufink wrongk.
I'm just stirrin bud.
Just checked last night, and yes... its still there(I do know what you were refering to  )
|
|
|
