| Author | Topic |
|---|
Location:
cronulla
Registered:
September 2002
|
|
GZ10 or GA61 engine mounts/crossmember and MZ/GZ10 doors
|
Thu, 14 October 2004 15:17
|
 |
i am looking for engine mounts and or crossmember from a standard GZ10 soarer or GA61 supra with 1G motor, and also some MZ/GZ10 doors, just incase i ever need em.
cheers.
|
|
|
I supported Toymods
Location:
Perth
Registered:
May 2002
|
|
Re: GZ10 or GA61 engine mounts/crossmember and MZ/GZ10 doors
|
Fri, 15 October 2004 01:19
|
|
Bump, for a good cause 
|
|
|
Location:
Canberra
Registered:
October 2002
|
|
Re: GZ10 or GA61 engine mounts/crossmember and MZ/GZ10 doors
|
Fri, 15 October 2004 02:05
|
|
|
Try Ichiban in Moorebank,.. they had some doors for me,...
|
|
|
Location:
Perth, WA
Registered:
March 2004
|
|
Re: GZ10 or GA61 engine mounts/crossmember and MZ/GZ10 doors
|
Fri, 15 October 2004 04:56
|
|
i have an old 1gge engine that came out of my 88 mk3 supe
bottom end is gone, possibly just need new bearings
got manual 1gge ecu, loom, plus engine mounts
will go and get some pics soon
|
|
|
Location:
cronulla
Registered:
September 2002
|
|
Re: GZ10 or GA61 engine mounts/crossmember and MZ/GZ10 doors
|
Fri, 15 October 2004 10:36
|
|
|
thanks for the offer but im only after engine mounts and or crossmeber when it comes to engine. I wouldnt pass up on a complete half cut but....
|
|
|
I supported Toymods
Location:
Australia
Registered:
November 2003
|
|
Re: GZ10 or GA61 engine mounts/crossmember and MZ/GZ10 doors
|
Mon, 18 October 2004 00:55
|
|
JAZE, I've compared JCMF's GA61 crossmember to my MA61 crossmember, and they appeared the same. (I didn't have them in the same place at the same time though).
Get JCMF to send you a pic of his crossmember.
That said, I have an MA61 crossmember just lying around, and I may be swapping it for a GA61 crossmember in about a month.
|
|
|
Location:
cronulla
Registered:
September 2002
|
|
Re: GZ10 or GA61 engine mounts/crossmember and MZ/GZ10 doors
|
Thu, 21 October 2004 14:03
|
|
yeh, i think they are the same except for a mount for this vibration damper thingie for the 5M, but i believe the GA61 Mounts are quite different. if you buy a GA61 crossmember i would be very happy to be able to buż the GA61 mounts from you.
cheers 
|
|
|
I supported Toymods
Location:
Australia
Registered:
November 2003
|
|
Re: GZ10 or GA61 engine mounts/crossmember and MZ/GZ10 doors
|
Thu, 21 October 2004 14:10
|
|
|
Will keep you posted JAZE
|
|
|
