| Author | Topic |
|---|
Location:
Hornsby, Sydney
Registered:
October 2002
|
|
2T/3T head in any condition
|
Mon, 18 October 2004 07:30
|
 |
there are 4 screw in plugs under the exhaust ports on a 2t head and i'm missing 3 of them on the new engine i just picked up.
if any one has any of these or a blown 2t or 3t that they are willing to part with cheaply.
will trade for these items if i have sometheing you want.
also need the linkage that goes from the pivot point on the firewall to the carburettor. if any one has that.
cheers Roadrunner
|
|
|
Location:
Sydney
Registered:
June 2004
|
|
Re: 2T/3T head in any condition
|
Mon, 18 October 2004 08:20
|
|
i am assuming you are talking bout the emission control ports? if correct then you have the jap series motor like in my car. either way i have a 3T aussie motor without those ports, as far as i am aware motor is fully functional but cannot guarantee this.
you can have the whole motor, missing dizzy and carby (but might have another one lying round) for $100 pick up
as for linkage system i should have that too and ill throw that in (not sure if i have it as parts everywhere.
PM me if interested
|
|
|
Location:
Hornsby, Sydney
Registered:
October 2002
|
|
Re: 2T/3T head in any condition
|
Mon, 18 October 2004 09:28
|
|
the motor is fully rrebuilt and only want the old motor for the plugs.
thanks anyway
|
|
|
Location:
Sydney
Registered:
June 2004
|
|
Re: 2T/3T head in any condition
|
Mon, 18 October 2004 09:36
|
|
if thats the case then they are more than likely closed up, therefore what you can do is just use any bolt that fits 
not perfect but does the job
|
|
|
Location:
wollongong
Registered:
February 2004
|
|
Re: 2T/3T head in any condition
|
Mon, 18 October 2004 09:43
|
|
i have a bare 13t head with those screw hole things
if your interested??
|
|
|
Location:
Hornsby, Sydney
Registered:
October 2002
|
|
Re: 2T/3T head in any condition
|
Mon, 18 October 2004 09:51
|
|
|
do you have the srcews that go into them?
|
|
|
Location:
wollongong
Registered:
February 2004
|
|
Re: 2T/3T head in any condition
|
Mon, 18 October 2004 09:59
|
|
|
yeah i do but it seems that there are only 3 for the 13t head and the other has a grub screw. is that how the 2t is suposed to be?
|
|
|
Location:
Newcastle, Hunter Valley
Registered:
January 2004
|
|
Re: 2T/3T head in any condition
|
Mon, 18 October 2004 10:04
|
|
|
Just to let you know there are two sizes for these plugs. From what i have seen the 3t head usally has the larger ones
|
|
|
Location:
Rocklea qld
Registered:
February 2003
|
|
Re: 2T/3T head in any condition
|
Mon, 18 October 2004 10:13
|
|
|
i just checked mine and it has 1 grub screw 2 bolts and a egr valve part that has been blocked off...
|
|
|
Location:
South Australia
Registered:
July 2002
|
|
Re: 2T/3T head in any condition
|
Tue, 19 October 2004 13:09
|
|
I've got the throttle linkages from a TA-23, are they what you are looking for? I have no idea about the screws though... 
|
|
|
