| Author | Topic |
|---|
Location:
Wellington, NZ
Registered:
July 2004
|
|
Injected engine into carbed car? wiring q's
|
Sun, 24 October 2004 00:47
|
 |
|
ok, i havent personally put an injected engine into a carbed car. i've almost pulled the entire engine from the car, and im going to collect the new eninge and parts (3VZ-FE) next week. What parts should i grab that i usually wouldnt need to worrk about? im geting the engine, box, ecu, engine harness, afm....will i need any of the body harness? the fuse box only has a few wirres coming out of it after the bodyharness....these are for the lights ect. How would i go about wiring this engine harness in? can i just add the wires in at the fuse box or do i need to pull the whole cars loom and tap it? any ideas would be greatly appreciated!
|
|
|
Location:
Montrose, VIC
Registered:
May 2002
|
|
Re: Injected engine into carbed car? wiring q's
|
Sun, 24 October 2004 08:55
|
|
|
Might help if you told us what car it's going into - 3VZ, I'm guessing a Camry? Replacing a 3S-FC?
|
|
|
Registered:
May 2002
|
|
Re: Injected engine into carbed car? wiring q's
|
Mon, 25 October 2004 03:36
|
|
The only things you have to worry about from the body harness are the fuel pump wires and the instrument cluster wires..
Tim.
|
|
|
