| Author | Topic |
|---|
Location:
Perth, WA.
Registered:
August 2004
|
|
|
I supported Toymods
Location:
Perth
Registered:
May 2002
|
|
Re: FS: Autronic SMC
|
Thu, 28 October 2004 04:50
 
|
 |
|
What motor was it originally set up for? Can it be put on anything, or is it like Microtechs that are configured for a particular engine?
|
|
|
Location:
Perth, WA.
Registered:
August 2004
|
|
Re: FS: Autronic SMC
|
Thu, 28 October 2004 05:21
|
|
It was in my previous car, a 1997 Holden Rodeo with the 2.6 litre sohc 4 cylinder engine which I had turbocharged.
I don't see how it can be setup for one car and then that's the only car it can ever run, it's a fully reprogrammable ecu.
There's an extra sensor that comes with the loom which is the air inlet temp probe, the rest of the loom just wires into the factory sensors and injectors.
With the Rodeo I had to use a Nissan FJ-20DET distributor disk and Nissan CA-18DET throttle position sensor. Toyota's most likely won't need these but they come with the Autronic as I don't have any use for them now.
- Chris.
|
|
|
Location:
Terrigal
Registered:
May 2002
|
|
Re: FS: Autronic SMC Aftermarket Computer
|
Sun, 31 October 2004 23:12
|
|
|
Just a free plug, I run an autronic and might be biased but reckon it's the best ECU i've used.
|
|
|
