| Author | Topic |
|---|
I supported Toymods
Location:
Sydney, NSW
Registered:
February 2004
|
|
extract secondary and primary issues
|
Thu, 28 October 2004 02:59
|
 |
|
just want to kno if a 20Valve(4-2) 4AGE primary, will fit onto a 16Valve 4AGE secondary?
|
|
|
I supported Toymods
Location:
Sydney, NSW
Registered:
February 2004
|
|
Re: extract secondary and primary issues
|
Thu, 28 October 2004 03:30
|
|
|
ne one know?
|
|
|
I supported Toymods
Location:
Sydney, NSW
Registered:
February 2004
|
|
Re: extract secondary and primary issues
|
Thu, 28 October 2004 04:23
|
|
|
bump
|
|
|
I supported Toymods
Location:
Australia
Registered:
November 2003
|
|
Re: extract secondary and primary issues
|
Thu, 28 October 2004 05:27
|
|
STOP FUCKING BUMPING EVERYTHING EVERY HOUR
People aren't on these forums all day.
Let it sink to the bottom, then bump it.
If it doesn't get answered, it means nobody who has logged on knows the answer.
Just go get a custom set of extractors made already.
|
|
|
Location:
Menai area of Sydney
Registered:
June 2003
|
|
Re: extract secondary and primary issues
|
Thu, 28 October 2004 14:17
|
|
No.
I have 20v primaries on my 100kw (16v)and had to use 20v secondaries as well.
This means you need a heated O2 sensor as it is positioned further from the exhaust port and also the 20v sump as the 20v secondaries rub slightly on the 16v sump. (20v has a slightly different shape)
The size of the pipes and the angle of the joint are different between 20v and 16v - so the gaskets are different as well.
|
|
|
