| Author | Topic |
|---|
Location:
Toronto, Downtown
Registered:
September 2004
|
|
Can't find Coiloversor camber adjustment plates for aw11s
|
Wed, 03 November 2004 13:20
|
 |
I cant seem to find any decently priced coilovers or camber adjustment plates for my aw11 except for the ground control kits which sound a bit backyardish. Any help would be appreciated.
Oh and does anyone know if the standard aw11 supercharged suspension has adjustable shocks cause the ones from my half cut do and the guy from SSS said they were standard. They feel a bit too stiff to be standard.
|
|
|
Location:
Bundaberg, Qld.
Registered:
May 2002
|
|
Re: Can't find Coiloversor camber adjustment plates for aw11s
|
Wed, 03 November 2004 13:51
|
|
| 4agte wrote on Wed, 03 November 2004 23:20 |
Oh and does anyone know if the standard aw11 supercharged suspension has adjustable shocks cause the ones from my half cut do and the guy from SSS said they were standard. They feel a bit too stiff to be standard.
|
this could be open to debate.
i got a set of rear strut assemblies from a s/c half cut in Perth, they had adjustable shocks (4 way dampning) and different springs. after pulling them from the strut housing they had KYB and TRD stamped on them.
the 1988 s/c half cut i got from SSS in early 1999 has factory toyota non-adjustable normal shocks in it.
go figure.. 
|
|
|
Toymods member
I supported Toymods
Location:
Rydalmere, NSW
Registered:
May 2002
|
|
Re: Can't find Coiloversor camber adjustment plates for aw11s
|
Wed, 03 November 2004 21:19
|
|
| 4agte wrote on Thu, 04 November 2004 00:20 |
I cant seem to find any decently priced coilovers or camber adjustment plates for my aw11 except for the ground control kits which sound a bit backyardish. Any help would be appreciated.
Oh and does anyone know if the standard aw11 supercharged suspension has adjustable shocks cause the ones from my half cut do and the guy from SSS said they were standard. They feel a bit too stiff to be standard.
|
Have you tried K-Mac yet? They can make you up something custom if it isn't catered for (they do EVERY car). They hold more patents for inventing stuff than any other company in their field (suspension, etc). Check them out.
|
|
|
Location:
Toronto, Downtown
Registered:
September 2004
|
|
Re: Can't find Coiloversor camber adjustment plates for aw11s
|
Wed, 03 November 2004 21:24
|
|
| feral4mr2 wrote on Thu, 04 November 2004 00:51 |
| 4agte wrote on Wed, 03 November 2004 23:20 |
Oh and does anyone know if the standard aw11 supercharged suspension has adjustable shocks cause the ones from my half cut do and the guy from SSS said they were standard. They feel a bit too stiff to be standard.
|
this could be open to debate.
i got a set of rear strut assemblies from a s/c half cut in Perth, they had adjustable shocks (4 way dampning) and different springs. after pulling them from the strut housing they had KYB and TRD stamped on them.
the 1988 s/c half cut i got from SSS in early 1999 has factory toyota non-adjustable normal shocks in it.
go figure..
|
I think the springs are lower than normal and mine are 4 way adjustable aswell so i wouldnt be suprised if they were kyb with trd.
|
|
|
Location:
Canberra
Registered:
May 2002
|
|
|
