| Author | Topic |
|---|
Location:
ipswich queensland
Registered:
April 2004
|
|
how do i get 150hp out of a 2tgeu??
|
Thu, 04 November 2004 21:47
|
 |
any ideas appreciated
thank you
|
|
|
Location:
Brisbane
Registered:
May 2002
|
|
Re: how do i get 150hp out of a 2tgeu??
|
Thu, 04 November 2004 23:02
|
|
Turbo.
|
|
|
Location:
Brisbane
Registered:
March 2003
|
|
Re: how do i get 150hp out of a 2tgeu??
|
Thu, 04 November 2004 23:14
|
|
To get to 150Hp shouldnt really require that much work, although ask alot of 2TG owners, it can be very expensive..
Large Headwork,very large cams,stroke/bore anything as close to 2.0L as you can,bigger valves,upped compression/forgies, blueprinted and totally balanced, QuadThrottles? if your looking for big all motor power out of these motors then quads is the way to go, bigger injectors, i know of a 300+HP N/A 2TG running quadthrottles..(also very expensive) also your ignition system probably needs a bit of a boost also, so something setup from MSD would be the go.. programable ecu,
if you have really deep pockets then this would be the way to go about it, but besides that youl have 150hp or probably much more...  all you gotta do after that is throw it all in a KE20 or something.
hope that helps. 
|
|
|
Location:
ipswich queensland
Registered:
April 2004
|
|
Re: how do i get 150hp out of a 2tgeu??
|
Thu, 04 November 2004 23:15
|
|
ok good in sayin so but wat do i need to do it
so far ive come up with
-3tgte exhaust manifold and turbo
-intercooler of sum kind
-new exhaust system
wat else???
|
|
|
Location:
ipswich queensland
Registered:
April 2004
|
|
Re: how do i get 150hp out of a 2tgeu??
|
Thu, 04 November 2004 23:20
|
|
oh and by the way my engine is already 133hp
just incase that makes it any easier
|
|
|
Location:
Sydney
Registered:
June 2004
|
|
Re: how do i get 150hp out of a 2tgeu??
|
Thu, 04 November 2004 23:59
|
|
i have 2 questions for you....
1- what have you done so far to motor to get 133HP?
2- is that power rating at fly or wheels?
|
|
|
Location:
ipswich queensland
Registered:
April 2004
|
|
Re: how do i get 150hp out of a 2tgeu??
|
Fri, 05 November 2004 00:47
|
|
thats at the flywheel
im not sure wats been done but the injectors dont look original and i havent looked at the cams.
|
|
|
Location:
Carlingford, Sydney
Registered:
May 2002
|
|
Re: how do i get 150hp out of a 2tgeu??
|
Fri, 05 November 2004 00:55
|
|
dont bother unless u have a te27 
|
|
|
Location:
ipswich queensland
Registered:
April 2004
|
|
Re: how do i get 150hp out of a 2tgeu??
|
Fri, 05 November 2004 03:46
|
|
|
if i could find one id have one
|
|
|
Location:
nth ringwood, Victoria
Registered:
August 2002
|
|
Re: how do i get 150hp out of a 2tgeu??
|
Fri, 05 November 2004 09:08
|
|
look 11to 1 comp ,320 duration and 440 lift good rods and a set of 48 webbers and a nice set of extractors will make 165 hp no worries ,but sik ta22 with his cough bullshit 300 hp N/A 1600 is full of shit ,maybe it has a invisable turbo on it 
|
|
|
Location:
ipswich queensland
Registered:
April 2004
|
|
Re: how do i get 150hp out of a 2tgeu??
|
Fri, 05 November 2004 11:38
|
|
ok instead of makin a new post il put my question here
i am running my electric ignition dizzy off a standard coil without an igniter. wat problems will this cause??
so far i think that its blowing black smoke from not being engough spark, is this right or wrong??
|
|
|
Location:
Sydney
Registered:
August 2004
|
|
Re: how do i get 150hp out of a 2tgeu??
|
Fri, 05 November 2004 11:41
|
|
WANTED: Te27, in good condition, will pay up to 5 grand.
hehehehehehe
|
|
|
Location:
Sydney
Registered:
August 2004
|
|
Re: how do i get 150hp out of a 2tgeu??
|
Fri, 05 November 2004 11:43
|
|
300hp N/A?
bwahahahahahaha and then he fell out of bed!
|
|
|
Location:
Brisbane
Registered:
February 2003
|
|
Re: how do i get 150hp out of a 2tgeu??
|
Fri, 05 November 2004 11:57
|
|
| lilcrash wrote on Fri, 05 November 2004 21:38 |
i am running my electric ignition dizzy off a standard coil without an igniter. wat problems will this cause??
|
you mean you have a electric ignition dizzi with the pickup that came with the dizzi?
then you need the ignitor to drive the coil - the pickup/sensor does not act like a set of points, it only triggers the ignitor, it will not trigger a coil on it's own.
with the proper pickup/ignitor/coil you'll get very good spark.
unless you're comfortabel modifying your electrical systems, just stick to the factory setup.
| Quote: |
so far i think that its blowing black smoke from not being engough spark, is this right or wrong??
|
black smoke would indicate too much fuel - perhaps with better spark, you might burn more of it.
|
|
|
Location:
Perth
Registered:
August 2004
|
|
Re: how do i get 150hp out of a 2tgeu??
|
Fri, 05 November 2004 12:00
|
|
| muaythaiman wrote on Fri, 05 November 2004 22:43 |
300hp N/A?
|
HAHAHAHAHHAHAHAHHAHA!!!!!!!!!!
oh god that made my day...
An engine designed in the 60's developing 187BHP per litre!!!!
That reminds me of those roadrunner cartoons where the laws of physics go on holidays!!!
|
|
|
Location:
Hobart
Registered:
August 2004
|
|
Re: how do i get 150hp out of a 2tgeu??
|
Fri, 05 November 2004 12:12
|
|
lol.. i just had to laugh!! 
|
|
|
Location:
Victoria
Registered:
May 2002
|
|
Re: how do i get 150hp out of a 2tgeu??
|
Fri, 05 November 2004 13:24
|
|
I challenge you to say something usefull, that isnt piggy backing on what someone else allready has said
| TRD_Celica wrote on Fri, 05 November 2004 23:12 |
lol.. i just had to laugh!!
|
|
|
|
Location:
ipswich queensland
Registered:
April 2004
|
|
Re: how do i get 150hp out of a 2tgeu??
|
Fri, 05 November 2004 21:13
|
|
so who believe that an electric dizzy will not not run off a standard coil without an igniter??
my car runs ok like this i just hooked the green plug into 2 diffrent wires and hooked it to the coil.
|
|
|
Location:
Ipswich
Registered:
October 2003
|
|
Re: how do i get 150hp out of a 2tgeu??
|
Fri, 05 November 2004 22:06
|
|
I have a 22re coil and ignitor here you can have for $30 if you want? When the wreckers wanted $70 for one set, I thought I may as well grab a "spare".
|
|
|
Location:
ipswich queensland
Registered:
April 2004
|
|
Re: how do i get 150hp out of a 2tgeu??
|
Fri, 05 November 2004 23:49
|
|
i got a elec coil and igniter just neva botherd putin it on
its on now but its not workin so i dont know
thanx neway
|
|
|
Registered:
May 2002
|
|
Re: how do i get 150hp out of a 2tgeu??
|
Sat, 06 November 2004 00:18
|
|
There are two types of 2tgeu electronic dizzy.(to my knowledge).
One which requires an external ignitor pack, the other has an internal ignitor and will run fine on a high voltage coil.
I had the latter on my last 2tg (88260 head).
Hope that was of some help.
Tom
|
|
|
Location:
ipswich queensland
Registered:
April 2004
|
|
Re: how do i get 150hp out of a 2tgeu??
|
Sat, 06 November 2004 00:26
|
|
|
all i know is my engine doesnt have a number on the head.
|
|
|
Location:
Brisbane
Registered:
February 2003
|
|
Re: how do i get 150hp out of a 2tgeu??
|
Sat, 06 November 2004 02:24
|
|
if you open the dizzi, you should be able to identify the presence or absence of the ignitor.
external ignotor model will have a pickup like the units inside 18RG electronic dizzi.
the head number is cast into the head - someone else here will probably know where to look for it?
|
|
|
Location:
ipswich queensland
Registered:
April 2004
|
|
|
Location:
Tassie
Registered:
October 2003
|
|
|
Location:
sydney
Registered:
March 2003
|
|
Re: how do i get 150hp out of a 2tgeu??
|
Sat, 06 November 2004 08:31
|
|
if you already have 133 then all you need is a 17 hp nos kit
that will give you 150
but first think of how much it will cost you
if its goin to cost 2000 dollars to get over 150
then why not spend 3000 on a turbo system and get over 200 hp from it
|
|
|
Location:
ipswich queensland
Registered:
April 2004
|
|
Re: how do i get 150hp out of a 2tgeu??
|
Sat, 06 November 2004 09:38
|
|
so far ive come up with i can do a turbo conversion for under $1000 but im not sure if i want to bother, i could just go and buy a 1ggte or sumthin for the same money
opinions please
|
|
|
