| Author | Topic |
|---|
Location:
Terrigal
Registered:
May 2002
|
|
4age fuelrail component (dampner?)
|
Mon, 08 November 2004 05:37
|
 |
Hello, i'm missing a bit on my 4age fuelrail. At one end I have the regulator, but whatever is meant to be at the other end is missing. I think its the dampner / return line.
Does someone have one??
Thanks
Joel
|
|
|
I supported Toymods
Location:
melbourne
Registered:
June 2002
|
|
Re: 4age fuelrail component (dampner?)
|
Mon, 08 November 2004 06:16
|
|
the regulator will be at the back, the return comes out of the regulator.
the fuel feed is a banjo bolt type thing
pics?
|
|
|
Location:
Terrigal
Registered:
May 2002
|
|
Re: 4age fuelrail component (dampner?)
|
Mon, 08 November 2004 06:27
|
|
Sorry I didn't give that enough thought...
Yeah I have the regulator.
Its the other end of the rail, so where the fuel would come in. Probably is a banjo style, but thought there was a dampner on the top of it.
Cheers
Joel
|
|
|
I supported Toymods
Location:
melbourne
Registered:
June 2002
|
|
Re: 4age fuelrail component (dampner?)
|
Mon, 08 November 2004 06:46
|
|
i dont think so, on mine it went like this:
banjo which got bolted onto fuel rail, nylon/plastic pipe which was crimped on to this banjo fitting, which was crimped on to short length of steel pipe, which had a length of rooted 8mm EFI hose clamped on to it.
i ground/mangled all that off and just shoved some 6mm efi hose over the banjo fitting.
|
|
|
