| Author | Topic |
|---|
Location:
western suburbs,sydney
Registered:
June 2002
|
|
4agte question
|
Mon, 08 November 2004 11:46
|
 |
|
Has anyone here fed an oil return line from turbo and an oil return line from the oil cooler and joined both lines into a t-piece to fit the original sump fitting for the oil cooler? do you think this would work well in practice? As it would save me drilling a hole & welding a fitting in for oil return for turbo.
|
|
|
Location:
western suburbs,sydney
Registered:
June 2002
|
|
Re: 4agte question
|
Mon, 08 November 2004 12:22
|
|
|
*bump*
|
|
|
Location:
Sydney
Registered:
February 2003
|
|
Re: 4agte question
|
Mon, 08 November 2004 12:29
|
|
|
youd want the t-piece to be more like a v-piece to avoid restricting the flow out of the turbo
|
|
|
Location:
Kita-Ku, Sapporo, Japan
Registered:
January 2003
|
|
Re: 4agte question
|
Mon, 08 November 2004 12:34
|
|
| serge wrote on Mon, 08 November 2004 22:46 |
Has anyone here fed an oil return line from turbo and an oil return line from the oil cooler and joined both lines into a t-piece to fit the original sump fitting for the oil cooler? do you think this would work well in practice? As it would save me drilling a hole & welding a fitting in for oil return for turbo.
|
not such a good idea maybe? coo0ler is bypass so not always oil going thru, but if you do anything to block the oil going out of turbo = bad.. need the biggest free-est? flowing oil return for turbo... perhaps 
|
|
|
