| Author | Topic |
|---|
Location:
Sydney
Registered:
October 2002
|
|
Greddy BCC for 1JZ Soarer
|
Tue, 08 October 2002 08:21
|
 |
|
Hi, anyone know the correct voltage setting for the greddy boost cut controller for a 1JZ Soarer. GReddy dont have instructions on their website.
|
|
|
Location:
Wollongong
Registered:
May 2002
|
|
Re: Greddy BCC for 1JZ Soarer
|
Tue, 08 October 2002 09:46
|
|
|
Should be about 4.6-4.7V reading (max.) to the MAP sensor I think.
|
|
|
Location:
Sydney
Registered:
May 2002
|
|
Re: Greddy BCC for 1JZ Soarer
|
Tue, 08 October 2002 12:29
|
|
lex
What model Greddy unit do you have?
They make a model specific to the 1JZ GTE requiring no manual adjustment.
|
|
|
Location:
Sydney
Registered:
October 2002
|
|
Re: Greddy BCC for 1JZ Soarer
|
Wed, 09 October 2002 00:26
|
|
|
Thanks for the replies, it is the one with the manual adjustment, made for 1JZ and 2JZ. When i first checked it, it was on about 5.06V, came like this from Japan. The lowest it goes is 4.5V. At 4.8V with boost controller on max im only getting about 8.5 PSI of boost. I have a 3 inch turbo back exhaust, aftermarket HKS turbo's, M/T. It's really strange, i cannot get it to boost above factory.
|
|
|
