Author | Topic |
Location: Ipswich
Registered: October 2003
|
1g-gte Flywheel
|
Sat, 13 November 2004 03:20
|
|
Damn cars...
I need a gen 1 or gen 2 flywheel, have a larger gen 3 flywheel sitting here, who wants to swap? I already have the clutch/pressure plate to suit a gen 1 or 2, and have consequently found it won't bolt to the flywheel I just got, seemingly a gen 3.
The flywheel I have has a 236mm clutch face, and I need one with a 225mm clutch face. I'm too cheap to just buy another clutch for the gen 3, when the one I have to suit the gen 2 is a decent HD one.
Anyone interested in a bigger flywheel?
Cheers, Matt
|
|
|
Location: melbourne SE.
Registered: September 2002
|
Re: 1g-gte Flywheel
|
Sat, 13 November 2004 23:48
|
|
Did you try 2T-3T flywheel thay fit. I use one! Good luck. Sam.
|
|
|
Location: Ipswich
Registered: October 2003
|
Re: 1g-gte Flywheel
|
Sun, 14 November 2004 02:15
|
|
So 1g-gte gen 1 or 2 pressure plate and clutches will bolt up to a 2t/3t flywheel?
|
|
|
I supported Toymods
Location: Perth, Western Australia
Registered: December 2002
|
Re: 1g-gte Flywheel
|
Sun, 14 November 2004 09:34
|
|
Nope, 2T/3T flywheels are smaller still, you'll need a 3TGTE flywheel, or a Gen 1/2 1GGTE flywheel.
|
|
|
Location: Ipswich
Registered: October 2003
|
Re: 1g-gte Flywheel
|
Sun, 14 November 2004 11:04
|
|
Consarnit!
|
|
|