| Author | Topic |
|---|
Location:
Perth
Registered:
August 2004
|
|
MA61 RA60 Crossmember
|
Fri, 19 November 2004 05:05
|
 |
Ok cant seem to find this on a search so here goes...
My MA61 crossmember was at the engineer getting re welded mounts because I was unhappy with the previous work done to it... Anyway long story short He closed down and shut up shop... I cant track him down and now have no crossmember 
My question is that Im gonna have a hard time getting another ma61 crossmember in perth... Will an RA60 one fit??? Has anyone tried this??
I do know that the steering racks are different and are not interchangable... but im hoping the crossmemebr is... Im not going to use the origional engine mounts on them anyway so if it fits will save me a lot of hassle
|
|
|
Location:
Brisbane
Registered:
May 2002
|
|
Re: MA61 RA60 Crossmember
|
Fri, 19 November 2004 05:17
|
|
Nope, not interchangeable. From memory it's a different width.
|
|
|
Location:
Brisbane
Registered:
July 2002
|
|
Re: MA61 RA60 Crossmember
|
Fri, 19 November 2004 05:20
|
|
| stark wrote on Fri, 19 November 2004 16:05 |
Ok cant seem to find this on a search so here goes...
My MA61 crossmember was at the engineer getting re welded mounts because I was unhappy with the previous work done to it... Anyway long story short He closed down and shut up shop... I cant track him down and now have no crossmember
My question is that Im gonna have a hard time getting another ma61 crossmember in perth... Will an RA60 one fit??? Has anyone tried this??
I do know that the steering racks are different and are not interchangable... but im hoping the crossmemebr is... Im not going to use the origional engine mounts on them anyway so if it fits will save me a lot of hassle
|
ive got an ma61 crossmember.. but im in brisbane.. can post
it
i bought it from a wrecker and didnt need.. ill check how much it cost me and get back to you as soon as i find receipt
|
|
|
I supported Toymods
Location:
Australia
Registered:
November 2003
|
|
Re: MA61 RA60 Crossmember
|
Fri, 19 November 2004 05:21
|
|
I have one!!!!!
How urgently do you want it?
We *may* need it for a GA61 7MGTE conversion, but the chances of the GA61 and MA61 crossmembers being different are slim to none
Let me know
Also, Just order the Mounts of Bonneville autos, and it all bolts in.
|
|
|
Location:
Brisbane
Registered:
July 2002
|
|
Re: MA61 RA60 Crossmember
|
Fri, 19 November 2004 05:22
|
|
cost me 85 bucks
is it in good condition
you can have it for 40 bucks + you pay post, if you like
|
|
|
