Toymods Car Club Inc: Tech & Conversions => JDM AW11 ECU plug capability

Toymods Car Club
www.toymods.org.au

Toymods » Tech & Conversions » JDM AW11 ECU plug capability Show: Today's Posts :: Show Polls Email to friend

Author

Topic

gearb0x
Forums Junkie

Location:
Victoria
Registered:
May 2002

JDM AW11 ECU plug capability	Fri, 26 November 2004 04:33

Hey, Does anyone know what 4a ecus share the same plugs as the jap bigport GZE's? So i can gut it and wireup a megasquirt to use the stock loom Thanks Phill [Report message to a moderator]

TurboRA28
Forums Junkie

Location:
Terrigal
Registered:
May 2002

Re: JDM AW11 ECU plug capability	Fri, 26 November 2004 04:39

I think all bigport plugs are the same, and all smallport are the same. But not interchangeable. Bigport has yellow plugs and smallport has grey [Report message to a moderator]

gearb0x
Forums Junkie

Location:
Victoria
Registered:
May 2002

Re: JDM AW11 ECU plug capability	Fri, 26 November 2004 04:42

so physically the same, pinouts dont matter for obvious reasons just as long as theres pins in all the same places as the MR2 [Report message to a moderator]

fatmr2
Forums Junkie

Location:
sydney
Registered:
November 2003

Re: JDM AW11 ECU plug capability	Fri, 26 November 2004 12:04

I have both the bigport ge and gze looms and engines. the gze has a different dizzy set up and it also has a knock sensor. Other than that i dont think they are too much different. Try to get a wiring diagram of both. Club 4age have them i think? [Report message to a moderator]

Previous Topic:	AE92 question, Searching for Fuel Pump Wires . . . .
Next Topic:	95 3VZ-FE Camry - help on practical go-fast mods PLEASE?

Current Time: Sat Jan 25 18:57:27 UTC 2025

Total time taken to generate the page: 0.0095040798187256 seconds

.:: Contact :: Home ::.