Author | Topic |
Location: Melbourne
Registered: May 2004
|
|
|
Registered: February 2003
|
Re: 4AGTE Turbo manifold
|
Sun, 28 November 2004 22:26
|
|
i second this!
|
|
|
Location: Melbourne
Registered: May 2004
|
Re: 4AGTE Turbo manifold
|
Tue, 30 November 2004 06:20
|
|
Well cmon people!
jezza
|
|
|
Location: Bundaberg, Qld.
Registered: May 2002
|
Re: 4AGTE Turbo manifold
|
Tue, 30 November 2004 12:21
|
|
some pics of my log manifold on here.
constructed and tacked together by myself and final weld by my old man as my welding still has more to be improved on.
i wish i had bought my die grinder earlier, filing out the flange by hand was a real bastard.
|
|
|
Location: Nor Calif USA
Registered: June 2002
|
|
|
I supported Toymods
Location: fairfield NSW
Registered: January 2003
|
Re: 4AGTE Turbo manifold
|
Wed, 01 December 2004 01:45
|
|
posting in here so i'll remember to get a pic of my manifold for u guys.
|
|
|
Location: Melbourne
Registered: May 2004
|
Re: 4AGTE Turbo manifold
|
Wed, 01 December 2004 06:22
|
|
Thanks guys this is good so far. Any more pics is good!
If anyone has any workshops they recommend for this job, let us know also.
I know a few people are doing this conversion and this is all helpful.
Keep it up
Jezza
|
|
|
Location: Bundaberg, Qld.
Registered: May 2002
|
Re: 4AGTE Turbo manifold
|
Wed, 01 December 2004 09:15
|
|
honestly man, workshops charge way too much for a turbo manifold.
|
|
|
Location: Newcastle
Registered: June 2002
|
Re: 4AGTE Turbo manifold
|
Wed, 01 December 2004 09:32
|
|
Adsport, forum member, makes them I think. Try him perhaps.
|
|
|
I supported Toymods
Location: fairfield NSW
Registered: January 2003
|
Re: 4AGTE Turbo manifold
|
Fri, 03 December 2004 23:23
|
|
havent got pics yet but my manifold cost me 900 bones
|
|
|
Location: Melbourne
Registered: May 2004
|
Re: 4AGTE Turbo manifold
|
Sat, 04 December 2004 23:37
|
|
Heya joyride, if you could get pics then that would be great. If it cost 900 bones then it must be half decent?!
Who made it and yeah pics would be noice!
Jezza
|
|
|
I supported Toymods
Location: fairfield NSW
Registered: January 2003
|
Re: 4AGTE Turbo manifold
|
Sun, 05 December 2004 04:55
|
|
will do mate. it looked fairly good to me.
|
|
|
Location: Melbourne
Registered: May 2004
|
Re: 4AGTE Turbo manifold
|
Sun, 05 December 2004 06:39
|
|
joyride wrote on Sun, 05 December 2004 15:55 | will do mate. it looked fairly good to me.
|
sweet
Jezza
|
|
|
Location: Melbourne
Registered: May 2004
|
Re: 4AGTE Turbo manifold
|
Mon, 06 December 2004 22:54
|
|
Cmon i want more
Bump
Cheers
Jezza
|
|
|
Location: Melbourne
Registered: May 2004
|
Re: 4AGTE Turbo manifold
|
Wed, 08 December 2004 21:31
|
|
Bump.
|
|
|
I supported Toymods
Location: fairfield NSW
Registered: January 2003
|
|
|
Location: Melbourne
Registered: May 2004
|
Re: 4AGTE Turbo manifold
|
Thu, 09 December 2004 10:07
|
|
No worries joyride, in ya own time.
Cherry mistmas
Jezza
|
|
|
Location: Melbourne
Registered: May 2004
|
Re: 4AGTE Turbo manifold
|
Tue, 21 December 2004 07:11
|
|
Bump ho ho ho
Jezza
|
|
|
Location: Brisbane
Registered: February 2003
|
Re: 4AGTE Turbo manifold
|
Tue, 21 December 2004 17:04
|
|
I'll have pics of mine, mid to end week hopefully.
|
|
|
Location: Melbourne
Registered: May 2004
|
Re: 4AGTE Turbo manifold
|
Wed, 22 December 2004 06:38
|
|
Noice
Jezza
|
|
|
Location: Ballarat, Vic.
Registered: September 2002
|
Re: 4AGTE Turbo manifold
|
Wed, 22 December 2004 15:14
|
|
Rallystanza: post whore !!!!
|
|
|
Location: Melbourne
Registered: May 2004
|
Re: 4AGTE Turbo manifold
|
Thu, 23 December 2004 06:54
|
|
Clown: Hypocrite.
Have a look in the vic section. You practically use it like bloody msn.
Cheers
Jezza aka post whore
|
|
|
I supported Toymods
Location: fairfield NSW
Registered: January 2003
|
Re: 4AGTE Turbo manifold
|
Thu, 23 December 2004 21:28
|
|
i'll be seeing my car this afternoon (its been 2.5 weeks since i seen it last) so i'll post some pics tomorrow.
|
|
|
Registered: February 2003
|
Re: 4AGTE Turbo manifold
|
Fri, 24 December 2004 00:34
|
|
ok ladies and gentleman,
I have just been speaking to a source who is currently in NZ. He has mentioned that there is a custom fabrication place there that makes top notch manifolds in steam/stainless finish.
He'll be returning on Jan 12th, so what i was thinking was, if there is some interest here for manifolds to be made and brought over, then we might save abit of money.
Current rough estimate starting prices before possible discount is as follows:
$420 AUD for steam turbo manifold
$635 AUD for stainless turbo manifold
These prices are not yet confirmed, but will be followed up in the coming days with pics and dimensions.
So who would like these prices to be down? I guess the more people who would be interested and have the dosh before Jan 12th the better the chances these will be produced and brought over at a good price.
I for one will DEFINATELY cough up the cash.
PM me or respond here!
|
|
|
I supported Toymods
Location: Ademelaide, SA
Registered: July 2003
|
Re: 4AGTE Turbo manifold
|
Fri, 24 December 2004 19:34
|
|
Des, dont forget postage...NZ to Aus is a rip. mega cash. make sure you get a shipping quote before you commit to anything.
|
|
|
Registered: February 2003
|
Re: 4AGTE Turbo manifold
|
Fri, 24 December 2004 23:20
|
|
I'll take that to heart Steve, although they'll most probably be considered as luggage
|
|
|
I supported Toymods
Location: fairfield NSW
Registered: January 2003
|
Re: 4AGTE Turbo manifold
|
Fri, 24 December 2004 23:49
|
|
pictures as promised
|
|
|
Location: Melbourne
Registered: May 2004
|
Re: 4AGTE Turbo manifold
|
Sat, 25 December 2004 00:20
|
|
Hey Joyride thanks for the pics it looks good
Des i would be up for a manifold fo shizzle. Can we get some pics or something?
What do we think about stainless or steam? Benefits/unbenefits( )?
Keep me posted Des and Il help out wit shit if ya need
Jezza
|
|
|
I supported Toymods
Location: fairfield NSW
Registered: January 2003
|
Re: 4AGTE Turbo manifold
|
Sat, 25 December 2004 01:09
|
|
steam pipe manifolds are alot heavier than s/steel manifolds. just to let you know. i think there is a difference in thickness too?
|
|
|
Location: Melbourne
Registered: May 2004
|
Re: 4AGTE Turbo manifold
|
Sat, 25 December 2004 06:49
|
|
Yeah i have heard that steam pipe manifolds are alot heavier but they are also stronger?? I dont know.
I am still in two minds about what material to use. If a s/steel manifold can be constructed easier to flow better then a steam pipe then s/steel will be the go.
I have also heard that under high heat levels the stainless manifolds are prone to cracking, but i see a heap of s/steel manifolds on S13's, 180's and the likes.??
Still dunno
Jezza
|
|
|
Registered: May 2002
|
Re: 4AGTE Turbo manifold
|
Sat, 25 December 2004 10:43
|
|
Hi guys, here is a link to a couple of pics of my steam pipe manifold:
http://forums.toymods.org.au/index.php?t=msg&t h=39171&rid=204&S=f51d6888b8db2de10001a3ae a3cea3c6&pl_view=&start=0#msg_503404msg_50 3404
It's 3 years old, never had a problem. Tough as nails, all the inside of mine is ported too so no join marks or weld protruding from the inside.
I only have a small bay so the design of my manifold had to ensure that the turbo would fit without fouling on anything.
If you go stainless steel make sure you brace it well!!!!
My dump pipe is stainless and has had no probs at all, but it does not have the same stress as a manifold.
|
|
|
Location: Adelaide
Registered: May 2003
|
Re: 4AGTE Turbo manifold
|
Sun, 26 December 2004 08:55
|
|
i sent u the email des...they look nice....
|
|
|
Location: Melbourne
Registered: May 2004
|
Re: 4AGTE Turbo manifold
|
Mon, 27 December 2004 01:10
|
|
Heya truenosedan, can ya send me some pics too.
sscommodore12@hotmail.com
Thanks mate
Jezza
|
|
|
Registered: February 2003
|
|
|
Location: Adelaide
Registered: May 2003
|
Re: 4AGTE Turbo manifold
|
Wed, 29 December 2004 00:54
|
|
thanks for uploading em for me...
|
|
|
Location: Melbourne
Registered: May 2004
|
Re: 4AGTE Turbo manifold
|
Wed, 29 December 2004 01:17
|
|
Jesus mary and joseph that looks like some damn good fabrication!!
I am in 200% for sure!!!
Lets do it!
Jezza
|
|
|
Registered: February 2003
|
Re: 4AGTE Turbo manifold: NOW YOU CAN BUY!!!
|
Wed, 29 December 2004 02:49
|
|
Jezza,
you wanna whack this into a sale section so we get more interest?
so far it's you and me for sure.
|
|
|
Location: Melbourne
Registered: May 2004
|
Re: 4AGTE Turbo manifold: NOW YOU CAN BUY!!!
|
Wed, 29 December 2004 03:10
|
|
I was thinkn that.
How do i do it??
Do i start a new thread??
Jezza
|
|
|
Location: qld
Registered: October 2003
|
Re: 4AGTE Turbo manifold: NOW YOU CAN BUY!!!
|
Wed, 29 December 2004 03:17
|
|
forgive me if im wrong, but isnt that a fwd setup pictured?
|
|
|
Registered: February 2003
|
Re: 4AGTE Turbo manifold: NOW YOU CAN BUY!!!
|
Wed, 29 December 2004 03:21
|
|
mr2drift wrote on Wed, 29 December 2004 14:17 | forgive me if im wrong, but isnt that a fwd setup pictured?
|
yeah that's a FWD setup off a later model levin if i'm not wrong.
but they are just examples of the finish this fella can achieve.
Jezza - start a new thread in engine/mechanicals 'GROUP BUY' DO IT!! DO IT NAAOOOW !!
|
|
|
Location: New Zealand
Registered: May 2004
|
Re: 4AGTE Turbo manifold: NOW YOU CAN BUY!!!
|
Wed, 29 December 2004 03:35
|
|
Is the company in NZ, Nite Parts?
|
|
|
Registered: February 2003
|
Re: 4AGTE Turbo manifold: NOW YOU CAN BUY!!!
|
Wed, 29 December 2004 03:43
|
|
Could be. Are they renowned for these?
|
|
|
I supported Toymods
Location: fairfield NSW
Registered: January 2003
|
Re: 4AGTE Turbo manifold: NOW YOU CAN BUY!!!
|
Wed, 29 December 2004 05:10
|
|
thats some nice handiwork there. cheap too.
|
|
|
Toymods Social Secretary
Location: Sydney
Registered: July 2002
|
Re: 4AGTE Turbo manifold: NOW YOU CAN BUY!!!
|
Wed, 29 December 2004 05:48
|
|
NOTE TO ALL: Before posting a group buy thread, please run it by the board. email board@toymods.org.au
Thanks guys.
also - FWIW i would be asking for cheaper prices on those manifolds. $600 is still pretty high for something manufactured opposed to custom made.
|
|
|
Location: The Eastwood MASSIVE !
Registered: May 2003
|
Re: 4AGTE Turbo manifold: NOW YOU CAN BUY!!!
|
Wed, 29 December 2004 06:27
|
|
What about fwd manifolds
|
|
|
Location: Melbourne
Registered: May 2004
|
Re: 4AGTE Turbo manifold: NOW YOU CAN BUY!!!
|
Wed, 29 December 2004 21:40
|
|
Just fired off an email to the Toymods Board just to run the group buy past them.
So pending the approval of this group buy i will let you guys know and we can redirect the thread to the 'Engine, Mechanicals....' section of the forums.
If there is anyone elso keen on this let me know via pm and i can pass the numbers on to the board in this case.
Cheers guys,
Jezza
|
|
|
I Supported Toymods
Location: south Melbourne/KL
Registered: June 2004
|
Re: 4AGTE Turbo manifold: NOW YOU CAN BUY!!!
|
Wed, 29 December 2004 21:54
|
|
$426 for a turbo manifold!?!? same price for FWD??
right now a half stainless steel (cant remember wat its called) NA manifold cost close to $400 already in OZ!!
cant remember the brand either
|
|
|
Location: New Zealand
Registered: May 2004
|
Re: 4AGTE Turbo manifold: NOW YOU CAN BUY!!!
|
Wed, 29 December 2004 22:41
|
|
ae86slaver wrote on Wed, 29 December 2004 14:43 | Could be. Are they renowned for these?
|
Yeah They are a little backyard but there manifolds seem to work well. Check out http://garagedori.com/ for some of there work.
|
|
|
Location: Brisbane
Registered: February 2003
|
Re: 4AGTE Turbo manifold: NOW YOU CAN BUY!!!
|
Thu, 30 December 2004 04:04
|
|
Better late then never I guess
|
|
|
Location: Adelaide
Registered: May 2003
|
|
|
Location: Melbourne
Registered: May 2004
|
Re: 4AGTE Turbo manifold: NOW YOU CAN BUY!!!
|
Sat, 01 January 2005 07:15
|
|
Wall thickness on the stainless?
Jezza
|
|
|
Location: Adelaide
Registered: May 2003
|
Re: 4AGTE Turbo manifold: NOW YOU CAN BUY!!!
|
Sun, 02 January 2005 01:19
|
|
ill find out tomorrow
|
|
|
Location: Barbados
Registered: October 2004
|
Re: 4AGTE Turbo manifold: NOW YOU CAN BUY!!!
|
Fri, 07 January 2005 11:52
|
|
what sthe story with these manifolds i want one of the 660 ones but with a external wastegate pipe, is that possible?
|
|
|
Location: Melbourne
Registered: May 2004
|
Re: 4AGTE Turbo manifold: NOW YOU CAN BUY!!!
|
Fri, 07 January 2005 22:45
|
|
Hey man yeah at the moment we are still trying to work things out because i have been informed that the guy making the manifolds will onlt make FWD manifolds!
So will get back to this thread when more info becomes availiable.
Jezza
|
|
|
Location: Barbados
Registered: October 2004
|
|
|
Location: Barbados
Registered: October 2004
|
Re: 4AGTE Turbo manifold: NOW YOU CAN BUY!!!
|
Wed, 19 January 2005 16:08
|
|
has everybody abandoned this are youy guys still havin trrouble with this guy can i please get the manifold makers contact info or a update on these?
|
|
|
Location: Adelaide
Registered: May 2003
|
Re: 4AGTE Turbo manifold: NOW YOU CAN BUY!!!
|
Thu, 20 January 2005 01:22
|
|
abandonned
|
|
|
Location: Perth
Registered: July 2004
|
Re: 4AGTE Turbo manifold: NOW YOU CAN BUY!!!
|
Thu, 20 January 2005 09:28
|
|
whoa...I missed this earlier...but it looks like I got in too late anyway. So there is no more talk of turbo manifolds? Id'd be looking for one for an AW11...
|
|
|
Location: Melbourne
Registered: May 2004
|
|
|
Location: Ireland
Registered: May 2002
|
Re: 4AGTE Turbo manifold: NOW YOU CAN BUY!!!
|
Thu, 20 January 2005 12:12
|
|
RWD only manifold. Wont fit AW11 or FWD setups (ae92 etc)
http://www.skynet.ie/~eireae86/tech/Turbo/
Made to order in Malaysia.
email me for info and pricing.
|
|
|