| Author | Topic |
|---|
Location:
qld
Registered:
December 2003
|
|
HELP! fuel line to fuel rail, advice needed.
|
Thu, 02 December 2004 10:45
|
 |
pulled the fuel line off an sv21 camry (5sf?) today cos the one on the rail of my ae93 4ag thats going into my sprinter didnt have one.
its the inlet line that goes to the fuel rail. its has a regular banjo fitting at one end, that came off the filter(on the camry), and a funny fuel regulator looking thing at the other end that was attached to the fuel rail on the camry.
which end should i attach to the 4ag rail? either? the big funny looking thing? what does it do?
hope this makes sense to someone.
cheers.
|
|
|
Location:
Kita-Ku, Sapporo, Japan
Registered:
January 2003
|
|
Re: HELP! fuel line to fuel rail, advice needed.
|
Thu, 02 December 2004 11:00
|
|
|
funny thing = fuel pulsation damper?
|
|
|
Location:
1st street on the right
Registered:
November 2002
|
|
Re: HELP! fuel line to fuel rail, advice needed.
|
Thu, 02 December 2004 13:19
|
|
|
Thats correct, FPD goes at the return end or the rail to the tank I believe from memory but confirm before fitting.
|
|
|
Location:
qld
Registered:
December 2003
|
|
Re: HELP! fuel line to fuel rail, advice needed.
|
Thu, 02 December 2004 21:27
|
|
|
was definately on the inlet line. thinking it was a fuel dampener. think ill just use that end. only reason it matter is because ill be cutting the other end off, and using hose clamps to clamp it to the fuel line/filter, and the 2 hose ends are differant. cheers guys.
|
|
|
