| Author | Topic |
|---|
Location:
Perth W.A.
Registered:
April 2004
|
|
|
Location:
South Eastern Subs
Registered:
March 2004
|
|
Re: GReddy e-manage for sale [Perth]
|
Tue, 04 January 2005 06:03
 
|
 |
|
What would it take to fit it to a 1G-GTE..
|
|
|
Toymods Social Secretary
Location:
Sydney
Registered:
July 2002
|
|
Re: GReddy e-manage for sale [Perth]
|
Tue, 04 January 2005 06:29
|
|
It would take some wiring and screws.
there is a yahoo group for the emanage, and about a million other pages out there with all the info on it if you are interested, and can use google.
|
|
|
Location:
Perth W.A.
Registered:
April 2004
|
|
|
Location:
South Eastern Subs
Registered:
March 2004
|
|
Re: GReddy e-manage for sale [Perth]
|
Wed, 05 January 2005 02:13
|
|
So not too hard.. I make wiring looms and have a bit autoelectrical expirience so i should be able to do it..Do i just tap into the ECU wires from the E-manage loom??
Also what do guys think of this unit...I don't want a stand alone system and i was going to put a HKS PFC Fcon... I like this system cause of ignition/timing controll..
|
|
|
I supported Toymods
Location:
Adelaide
Registered:
July 2004
|
|
Re: GReddy e-manage for sale [Perth]
|
Wed, 05 January 2005 07:06
|
|
|
you have PM
|
|
|
Location:
Perth W.A.
Registered:
April 2004
|
|
Re: GReddy e-manage for sale [Perth]
|
Wed, 05 January 2005 14:36
|
|
|
Yep real easy to install main unit. Tap into throttle position, rpm signal, ground and 12V power, and cut the AFM signal wire from the computer and join the two wires in the loom.
|
|
|
Location:
Perth W.A.
Registered:
April 2004
|
|
Re: GReddy e-manage for sale [Perth]
|
Mon, 10 January 2005 14:42
|
|
|
SOLD. Thanks all.
|
|
|
