| Author | Topic |
|---|
Location:
Rocklea qld
Registered:
February 2003
|
|
Help fund a new ecu for my car sale
|
Tue, 11 January 2005 08:19
|
 |
3 x 18rg heads.
genuine 18rgeu electronic dizzy coil and ignitor setup
18rgeu efi thermostat housing
set of mags. 4 stud 4x114 to suit corona celica etc. 14". will try to organise pics
megasquirt efi setup. Includes ecu, wiring loom, and sensers, relay board.
ta22 passenger door, bonnet gaurds and boxes of other parts
ta23 doors, bonnet gaurds and heaps of extras
autometer sport comp boost gauge
speco mechanical water temp gauge. new.
lots of other 18rg parts like pistons, cranks, cases, covers etc etc
21r and 22r parts
xt130 front struts complete
2 1/4 inch exhaust x2. one to suit xt130 corona and the other for early 22/23 celicas
2 x turbos one seems to spin good, the other is a little tight but still turns
18rg inlet manifold and twin solexs, 6 x trumpets. carbs been rebuilt just need float levels set.
4 x 15inch tyres low profile 195 x 50 x 15"
18rc extracters in good condition just surface rust.
set of lowered springs suit ta/ra23 28 and 40 and probably other vehicels also
complete xt130 for wrecking also
make an offer on any parts. all funds are going towards funding a new ecu for my car.
thankyou
|
|
|
Location:
Gympie Qld
Registered:
December 2004
|
|
Re: Help fund a new ecu for my car sale
|
Tue, 11 January 2005 11:28
|
|
|
What are the trumpets like. Size, shapre etc. Any pics and will you seperate them from the carbies. If so how much???
|
|
|
On Probation
Registered:
January 2004
|
|
Re: Help fund a new ecu for my car sale
|
Tue, 11 January 2005 22:11
|
|
How much for the xt130 front struts complete + postage to 4034?
Cheers
|
|
|
Registered:
August 2004
|
|
Re: Help fund a new ecu for my car sale
|
Wed, 12 January 2005 08:44
|
|
wat price are you looking at for the megasquirt ecu and bits and pieces was it on an 18RGEU and ignitor box if you would seperate other than that im after an air flow meter.
Pete
|
|
|
Location:
Rocklea qld
Registered:
February 2003
|
|
Re: Help fund a new ecu for my car sale
|
Wed, 12 January 2005 11:20
|
|
ok wont seperate the trumpets fro the carbs. chasing $200 for the lot.
$80 for the struts. im also in brisbane so should be easy to get them to ya.
atm i wanna sell the cu last incase the other unit does fall through but if all goes well ill pm you a price
|
|
|
Location:
melb
Registered:
May 2002
|
|
Re: Help fund a new ecu for my car sale
|
Wed, 12 January 2005 11:58
|
|
can u tell us a bit about this megasquirt ecu....
I take it, it is not that good as your looking for a new ecu....
what are its limitations and what did it cost u..
|
|
|
Location:
Ipswich
Registered:
May 2002
|
|
|
Location:
Rocklea qld
Registered:
February 2003
|
|
Re: Help fund a new ecu for my car sale
|
Thu, 13 January 2005 12:12
|
|
Fook- Yes the rims are the ones you know about. including the ones i had on my car.
the only reason i considered selling my megasquirt is i dont have the patience to tune it. but i wont sell that until everything else is sold and atm it looks like ill be keeping that but everything else is either for sale or sold.
|
|
|
Location:
Hobart
Registered:
June 2002
|
|
Re: Help fund a new ecu for my car sale
|
Fri, 14 January 2005 08:37
|
|
to be perfectly frank, i had my megasquirt from first start to drivable around the block within one afternoon. Thats from stratch with no help.
chrisss more info on megasquirt at www.msefi.com and www.megasquirt.info if you are interested please do your homework first, saves some time asking questions after things go wrong. Remember it is a DIY system, you need to know or learn alot about efi.
Ben, never got back to you about those cams because i discovered (as you probably did) that the 88250 ones are identical profile to the early ones.
My megasquirt is running ignition control aswell now, and im looking for an electronic dizzy and maybe ignitor, how much you want for yours?
|
|
|
Location:
Rocklea qld
Registered:
February 2003
|
|
Re: Help fund a new ecu for my car sale
|
Fri, 14 January 2005 09:49
|
|
the 88230 cams i had were deffinetly bigger then the other cams i have here also.
We have made more progress with the megasquirt and after talking to a few people they think i will be getting my trouble because i have no exhaust. only a engine pipe going just under the car. So im gonna get my turbo gear on and done and if all else fails i can get it done professionally on a dyno for max $500. also got my new injecters today so ill see how they go in it.
|
|
|
Location:
Canberra
Registered:
September 2003
|
|
Re: Help fund a new ecu for my car sale
|
Thu, 27 January 2005 09:47
|
|
did you sell the 18rgeu efi thermostat housing? if not, what's it's condition and how much and will you ship to canberra?
thanks
chris
|
|
|
