| Author | Topic |
|---|
Registered:
November 2004
|
|
Soarer pwr output
|
Tue, 25 January 2005 03:38
|
 |
hey i got a 93 tt soarer, mods are
600 x 400 x 100mm FMIC
full 3inch turbo back exhaust
Cold air intake (although with a cooler im not sure it serves much purpose)
looking at getting a haltech soon, but that aside how much do you reckon i should have at the rears?
|
|
|
Location:
Perth
Registered:
October 2003
|
|
Re: Soarer pwr output
|
Tue, 25 January 2005 03:59
|
|
|
Auto or manual?
|
|
|
Location:
Wollongong
Registered:
May 2002
|
|
Re: Soarer pwr output
|
Tue, 25 January 2005 04:19
|
|
Auto/manual makes virtually zero difference with a Soarer on the dyno. Compared 2 identical Soarers one day (apart from differing transmission) and came within 3kW of each other.
If you are still running standard boost, I'd say around the 185kW mark at the treads.
|
|
|
Location:
outer easter melbourne
Registered:
September 2004
|
|
Re: Soarer pwr output
|
Tue, 25 January 2005 07:10
|
|
I beg to differ about them being almost the same. At an ALSC club meet we ran over 12 soarers and all having diffences between auto and manual. For instance my soarer got 155.8rwkw for a stock manual where as some of the auto had to work much harder to get those numbers. For you info have a look here.
http://www.planetsoarer.com/dynolibrary/dynolibrar y.htm
|
|
|
Location:
Wollongong
Registered:
May 2002
|
|
Re: Soarer pwr output
|
Tue, 25 January 2005 08:30
|
|
They are very much varied results, and I would say that almost no two cars were identical in specs.
My comments were based on the following info:
Same year model Soarer, same trim/spec level (both GT-T models), factory boost levels (no boost controllers installed at all), identical front mount intercooler kits installed, standard intake systems. The only differences I could pick between the cars were paint colour and transmission type.
|
|
|
Location:
Sydney
Registered:
March 2003
|
|
Re: Soarer pwr output
|
Tue, 25 January 2005 13:08
|
|
|
Put it this way, I have a FMIC, Pod Filter (probably loosing power there) 3" exhaust and running a Haltech, on standard boost, ran 180rwkw, with a w58.
|
|
|
Location:
Brisbane
Registered:
July 2002
|
|
Re: Soarer pwr output
|
Tue, 25 January 2005 14:37
|
|
I had FMIC and Pod and 11 psi wit a 2.5 inch pipe bent exhaust,
made 200rwkw
|
|
|
