| Author | Topic |
|---|
Registered:
March 2004
|
|
1J HKS 264 Cams
|
Mon, 31 January 2005 12:09
|
 |
|
For sale pair of 1J (non vvti) 264 cams, inlet just been fitted, exhaust new still $1000. Will onsider swap for 254's. Cheers
|
|
|
Location:
brisbane
Registered:
May 2003
|
|
Re: 1J HKS 264 Cams
|
Mon, 31 January 2005 22:03
|
|
Jeeez.. I almost bought a set of 256's a little while back for a steal, but decided they'd be too small 
|
|
|
Location:
brisbane
Registered:
May 2003
|
|
|
Location:
sunny coast, qld
Registered:
October 2002
|
|
Re: 1J HKS 264 Cams
|
Tue, 01 February 2005 04:06
|
|
|
just wondering why you wanted to step back? Is the idle too lumpy, not enough low down power etc? What turbo/s are you running?
|
|
|
Registered:
March 2004
|
|
Re: 1J HKS 264 Cams
|
Tue, 01 February 2005 09:11
|
|
|
Honestly never ran it. But was going to use big 600hp turbo. Now lookin like a 480hp to get good midrange. I dont think the stage 2 will work well together.
|
|
|
Location:
Brissy
Registered:
December 2002
|
|
Re: 1J HKS 264 Cams
|
Tue, 01 February 2005 09:15
|
|
are these the biggest cams available for the 1j.
very very interested.
Rolly
|
|
|
Location:
Sydney
Registered:
March 2003
|
|
Re: 1J HKS 264 Cams
|
Tue, 01 February 2005 09:23
|
|
| quick 6 wrote on Tue, 01 February 2005 20:15 |
are these the biggest cams available for the 1j.
very very interested.
Rolly
|
HKS do a 272 set as well, these also have more lift (9.3mm compared to 9mm for the 264's).
|
|
|
Registered:
March 2004
|
|
Re: 1J HKS 264 Cams
|
Tue, 01 February 2005 10:17
|
|
These are stage 2 ones. Stenno stated the stage 3. To me it depends on what power your making and how youwanna make it. 
|
|
|
Location:
Sydney
Registered:
May 2002
|
|
Re: 1J HKS 264 Cams
|
Tue, 01 February 2005 10:30
|
|
These are great cams with a very nice midrange and decent top end - has been described as feeling like a third turbo kicks in at 4000rpm in my Soarer.
Idle can be pretty much tuned smooth or raised 500rpm higher to cover it up - only negative is the slight loss of brake booster vacuum efficiency but is minimal and expected with most cam upgrades.
These 264/step 2 HKS cams are also the largest you can go while still maintaining a non-interference 1JZ-GTE engine - I found out the hard way recently when a cambelt belt broke prematurely with only 11,000kms on it - to my surprise, valves and pistons didn't touch as I previously expected!
Good luck with the sale
|
|
|
Location:
Brissy
Registered:
December 2002
|
|
Re: 1J HKS 264 Cams
|
Tue, 01 February 2005 13:18
|
|
will you take $900
Rolly
|
|
|
