Toymods Car Club Inc: Members Rides => Blake's (pheonix) T-18

Toymods Car Club
www.toymods.org.au

F.A.Q.

Home

Members

Toymods » Members Rides » Blake's (pheonix) T-18 Show: Today's Posts :: Show Polls Email to friend

Author

Topic

Pheonix
Regular

Location:
Wa
Registered:
May 2002

Blake's (pheonix) T-18	Mon, 07 February 2005 04:42

OWNER Blake Weston BODY -1980 te72 -RWD -badges removed (waiting on respray) -dent in rear left quarter (thanks to crasy asian woman, nearly took out my mag aswell) -Zeon headlights -Side plastic guards removed -Chrome window surrounds removed, waiting to be put back on ENGINE -2T/3T GEU hybrid -Head 11111-88260 -3T-C block 86mm bore -Endurotec 3T hyperuretic pistons flycut (both reliefs) -Hastings pistons rings -King engine bearings -balanced crank with ground journals -8.5 (estimated could be slightly higher) compression ratio -last model 2T-GEU EFI hardware IGNITION -EMS 8860 ECU -EMS single coil ignitor -Bosch wideband ox -2T-GEU electronic distributor -Top Gun 8mm high tension leads -NGK Iridium IX plugs DRIVELINE HARDWARE -T-50 5 speed gearbox -2T-G flywheel -T Series diff -4.1:1 diff SUSPENSION & STEERING -King springs front & rear -Monroe GT Gas shock absorbers front & rear BRAKES -Standard discs at front -Standard drums at back ROLLING STOCK -Mags 14"x6" (cant remember the name) -Tyres - 195/60 SUMITOMO HTR 200 INTERIOR -SAAS steering wheel -2x Autotechnica racing seats -2x Klippan 4 point harness -aftermarket gear knob STEREO COMPONENTS -JVC MP3 head unit -Altec 280watt amp -Sony 6 1/2 inch dual cone 130W -Sony splits (using stock speakers as mid range, havnt blown yet but give bloody good sound, weird -2x Weconic 10" subs EXHAUST -Genie 4 to 1 extractors -1 7/8 inch to muffler -2 inch from muffler COMING SOON -3T-GTE exhaust manifold with Garrett turbo (waiting for install) -440cc 7M-GTE/3S-GTE injectors -Kicker S10L5 + full boot reconfig (waiting install) -Install the rest of the speakers (6 atm) -New amp (unsure which 1 yet, any ideas/offers) -Full respray PICTURES -The T-18 in Freo -Accident damage -The efi assembly -The machined crank -The hybrid block partially built -The imfamous piston skirt [Updated on: Sun, 24 July 2005 14:35] [Report message to a moderator]

jesseT18
Forums Junkie

Location:
Castle Hill, Sydney
Registered:
February 2004

Re: Blake's (pheonix) T-18	Mon, 07 February 2005 05:03

oi! get your own mod list!!! nice work though, good to see another t-18 copping some loving! this site is good for getting your pics up http://www.imageshack.us/ [Updated on: Mon, 07 February 2005 05:06] [Report message to a moderator]

Pheonix
Regular

Location:
Wa
Registered:
May 2002

Re: Blake's (pheonix) T-18	Mon, 07 February 2005 05:07

wat can i say, i was lasy lol, anyway from my memory i was already on the path of the hybrid before ya, u just beat me to building it lol, sorta happy but at the same time sad at the condition of T-18's in WA have not seen 1 near the condition of mine [Report message to a moderator]

Pheonix
Regular

Location:
Wa
Registered:
May 2002

Re: Blake's (pheonix) T-18	Sun, 24 July 2005 14:01

Damn pistons!!! was fixing an oil leak from the front timing cover, when i discovered part of a piston skirt sitting in the sump, it came fron the exhaust side of piston #2. The 1.6 2T-GEU has be placed back into the car for an unknown time period. [Report message to a moderator]

Previous Topic:	Buccy's MA61 with 1JZ VVTi goodness!
Next Topic:	jamies ke55 rolla PICS UP (56K warning)

-=] Back to Top [=-

Current Time: Tue Feb 4 16:34:46 UTC 2025

Total time taken to generate the page: 0.0070250034332275 seconds

.:: Contact :: Home ::.