| Author | Topic |
|---|
Location:
sydney
Registered:
January 2005
|
|
help!!! torque settings for 7m
|
Wed, 09 February 2005 10:27
|
 |
|
need settings for head studs and cam shaft bridges. any help greatly appreciated
|
|
|
Location:
Melbourne
Registered:
May 2002
|
|
Re: help!!! torque settings for 7m
|
Wed, 09 February 2005 10:31
|
|
for the studs with engine oil lube its 120ft/lbs from memory
|
|
|
Location:
Brisbane
Registered:
July 2004
|
|
Re: help!!! torque settings for 7m
|
Fri, 11 February 2005 06:26
|
|
Hope you dont mean head bolts..they're not 120ft/lbs!! Toyota recommends 58ft/lbs but many agree they should be torqued around 70, general figure is 72ft/lbs.
As for the camshaft bridges look here:
http://www.cygnusx1.net/supra/library/TSRM/in/IN_0 1.html
...its all there 
|
|
|
Location:
Melbourne
Registered:
May 2002
|
|
Re: help!!! torque settings for 7m
|
Fri, 11 February 2005 06:35
|
|
| capableronTRD wrote on Fri, 11 February 2005 17:26 |
Hope you dont mean head bolts..they're not 120ft/lbs!! Toyota recommends 58ft/lbs but many agree they should be torqued around 70, general figure is 72ft/lbs.
|
| Allan wrote on Wed, 09 February 2005 21:31 |
for the studs with engine oil lube its 120ft/lbs from memory
|
|
|
|
Location:
Brisbane
Registered:
July 2004
|
|
Re: help!!! torque settings for 7m
|
Fri, 11 February 2005 06:39
|
|
|
Ah yeah,Got confused (you know how some heads have bolts, others have studs..) my bad..
|
|
|
