| Author | Topic |
|---|
Location:
Hobart
Registered:
October 2004
|
|
cressida/crown wiring diagrams
|
Thu, 10 February 2005 08:18
|
 |
Hi everyone,
I've just had the engine changed in an 83 Cressida to that from an 87-88 Crown. (Thanks Clint/LimeGreen!) Now it's time for the electrics, swapping over the wiring harness from the two.  Of course, the harnesses are different!
Does anyone have a wiring diagram available for such a Crown? I can probably do without the Cressida one (although it would be handy if someone has one). Would you like to part with those diagrams or even copy them and send them on?
Much appreciated!
Scott.
|
|
|
Location:
Brisbane
Registered:
May 2002
|
|
Re: cressida/crown wiring diagrams
|
Thu, 10 February 2005 12:06
|
|
I have a hynes manual for a MX62 cressida (81-85) and can take pictures if you want of specific sections if you wish....just let me know.
Also there is the wiring diagram for a 5M-E out of a MX62 cressida in the tech docs section of this site (from the main page), prbly isn't much/any help to you as you are more likely after the chassis wiring?
Cheers
Wilbo
|
|
|
Location:
Hobart
Registered:
October 2004
|
|
Re: cressida/crown wiring diagrams
|
Thu, 10 February 2005 13:21
|
|
Hey Wilbo,
That'd be much appreciated, thanks.
I'd found the pic on the site and some other 7M diagrams, but the wiring and connectors etc, I guess the full schematic, is what I need. I'll pay for the film or developing or whatever.
Definitely also similar for an 87-88 Crown if anyone can help, thanks
Scott.
|
|
|
I supported Toymods
Location:
Australia
Registered:
November 2003
|
|
|
Location:
Brisbane
Registered:
May 2002
|
|
Re: cressida/crown wiring diagrams
|
Fri, 11 February 2005 03:30
|
|
Ok dokies, I'll have a look when I get home. What diagrams in particular do you want?
Do 87-88 crowns have 5mge's or 7mge?
I also have an MA70 wiring diagram and I think maybe a MX83 one around? If that would also help.
Cheers
Wilbo
|
|
|
Location:
Tamworth
Registered:
October 2002
|
|
Re: cressida/crown wiring diagrams
|
Fri, 11 February 2005 03:48
|
|
the crowns have a 7M but there doesn't seem to be many if any copys of a wiring diagram that i can find as they werent delivered to an english speaking country that i know of cause i to have been trying to find one.
i would imagine having just transfered the 7M from the crown to the cressie a MA70 or an MX83 wiring diagram may work
|
|
|
Location:
melb
Registered:
May 2002
|
|
Re: cressida/crown wiring diagrams
|
Fri, 11 February 2005 13:13
|
|
what motor is it that u r putting in the cressida, is it a 5MGE or a 7MGE.
if the motor was out of a local crown then it is the 5MGE (MS123) but if its from an import then its a 7MGE (MS135 or MS137)..
I can get a wiring diag if its the MS123 but I have no idea where to find a diag if its the MS135 or 137 (actually I need on myself)..
is the cressida an MX62? if so then its easy to find a wiring diag, there is one on this site in the tech docs section...
u will be up for a bit of custom wiring because the 86-88 5MGE is quite a bit different to the 5ME..
cheers
|
|
|
Location:
Brisbane
Registered:
May 2002
|
|
|
Location:
Hobart
Registered:
October 2004
|
|
Re: cressida/crown wiring diagrams
|
Tue, 15 February 2005 14:29
|
|
Thanks muchly wilbo and co. All very useful and just what I'm after! I'll have to call in to the mechanics and make sure it is a 5M-GE, but that's what I'm pretty sure it is. Glad it's not a 7M for the changeover sake
Maybe I should get one of you guys to fly over and complete the changeover 
|
|
|
