| Author | Topic |
|---|
Location:
Queensland
Registered:
February 2005
|
|
Spark Plugs for JDM 4AGE
|
Thu, 17 February 2005 09:45
|
 |
I recently got a Sprinter with a 4AGE JDM engine in it and it has BP6ES NGK Plugs in it. I thought that they use something more like the BCPR6EY-11 or something???
Cheers
|
|
|
Location:
Perth, WA
Registered:
December 2004
|
|
Re: Spark Plugs for JDM 4AGE
|
Thu, 17 February 2005 16:06
|
|
if the plug fits and works, chances are they are the correcct plugs, you could spend money getting them bullshit irridium ones, but why? all they do is spark! wheres my barbeque lighter 
|
|
|
Location:
melb
Registered:
May 2004
|
|
Re: Spark Plugs for JDM 4AGE
|
Thu, 17 February 2005 17:10
|
|
just run the standard no frills plugs my old man was an engine machinist he use to build 40000 dollar race engines and he
rekons the irridium plugs bullshit any way thats my 2cents cya
|
|
|
Location:
Sydney
Registered:
May 2002
|
|
Re: Spark Plugs for JDM 4AGE
|
Thu, 17 February 2005 22:11
|
|
BP6ES is a similar plug the BCPR6EY-11 only difference is in the tip, the S has a standard tip, where as the y has a v grooved centre which gives a better spark.
Ben.
|
|
|
Location:
Adelaide
Registered:
May 2003
|
|
Re: Spark Plugs for JDM 4AGE
|
Fri, 18 February 2005 01:10
|
|
whats wrong with the toyota ones...
they dont cost anymore...
|
|
|
Location:
Queensland
Registered:
February 2005
|
|
Re: Spark Plugs for JDM 4AGE
|
Fri, 18 February 2005 22:03
|
|
| ae86trueno wrote on Fri, 18 February 2005 08:11 |
BP6ES is a similar plug the BCPR6EY-11 only difference is in the tip, the S has a standard tip, where as the y has a v grooved centre which gives a better spark.
Ben.
|
But the BP6ES is a .8mm gap where the BCPR6EY-11 is a 1.1mm gap.
Cheers
|
|
|
I Supported Toymods
Location:
south Melbourne/KL
Registered:
June 2004
|
|
Re: Spark Plugs for JDM 4AGE
|
Sat, 19 February 2005 00:16
|
|
|
its doesnt matter which one u get. its the gap that matters. if im not mistaken i think its 1.1mm for ur engine
|
|
|
Location:
Kita-Ku, Sapporo, Japan
Registered:
January 2003
|
|
Re: Spark Plugs for JDM 4AGE
|
Sat, 19 February 2005 02:14
|
|
even with elec ignition, many motors still run better with smaller gap.. 0.8mm is a good place to start.
also the BCPR6EY11
is
14mm thread,
Hex size 5/8" socket. (thats smaller one)
projected nose
RESISTOR (reduces elec interference, but does nto affect spark much, if at all)
V groove
1.1mm gap
so the difference with BP6ES is bigger socket (does it fit in the spark plug tube?) no resistor (slightly more interference in EFI motor perhaps? better R than not sure)
V groove (really makes little difference.. maybe slight), and the gap.. you can gap plugs up, but gapping them down is harder.
Cya, Stewart
|
|
|
