| Author | Topic |
|---|
Toymods Social Secretary
Location:
Sydney
Registered:
July 2002
|
|
RN41 Hilux Diff (1410mm) $350 + Tailshaft $50 + 4AG-W58 bellhousing $350
|
Mon, 21 February 2005 01:48
|
 |
Before you ask - NO THIS IS NOT THE CORRECT WIDTH FOR RA2* CELICAS.
However, this IS the correct width for AE71, AE86, TE72 and similar models. You could use it on your xA2x celica, but speak to an engineer about that first. Of course you will need to get the mounts welded onto the diff for it to go into one of the above cars.
So i have a currently unmodified RN4x hilux rear axle, complete with axles, drum brakes, handbrake cables and tailshaft (which you can modify to suit your car for indestructo-shaft).
The centre i have for it is a 4.8:1 open centre though, but for around $300-400 people do sell 3.9:1 torsen LSDs (from MZ20 soarers, supras, etc etc)
The 4AG->W58 bellhousing i will only sell if it goes with the hilux diff, or someone buys pimp boy without it. So please dont ask about selling the bellhousing separately unless you have an unrefusable offer to make.
PRICES:
- Diff with centre $350
- tailshaft $50
- Complete Setup $700
- or make REASONABLE offers
[Updated on: Wed, 23 February 2005 23:22]
|
|
|
Toymods Social Secretary
Location:
Sydney
Registered:
July 2002
|
|
Re: RN41 Hilux Diff (1410mm) + Tailshaft + *maybe* 4AG-W58 bellhousing
|
Mon, 21 February 2005 01:59
|
|
oops, almost forgot - i have a spare 1410mm 4WD hilux diff too without a centre. This is the same housing, but different axles.
$150 or make an offer... less if it goes with the lot of course 
|
|
|
I supported Toymods
Location:
Plumpton/sydney
Registered:
November 2003
|
|
Re: RN41 Hilux Diff (1410mm) + Tailshaft + *maybe* 4AG-W58 bellhousing
|
Mon, 21 February 2005 02:11
|
|
Karl
I want the tail shaft
Ben
|
|
|
Location:
N.S.W
Registered:
May 2002
|
|
Re: RN41 Hilux Diff (1410mm) + Tailshaft + *maybe* 4AG-W58 bellhousing
|
Mon, 21 February 2005 09:41
|
|
|
Pm sent
|
|
|
Toymods Social Secretary
Location:
Sydney
Registered:
July 2002
|
|
Re: RN41 Hilux Diff (1410mm) + Tailshaft + *maybe* 4AG-W58 bellhousing
|
Mon, 21 February 2005 12:34
|
|
and replied to.
ben ill get back to you on the shaft of tail.
|
|
|
Toymods Social Secretary
Location:
Sydney
Registered:
July 2002
|
|
|
Location:
Adelaide, South Australia
Registered:
February 2005
|
|
Re: RN41 Hilux Diff (1410mm) $350 + Tailshaft $50 + 4AG-W58 bellhousing $350
|
Thu, 24 February 2005 12:45
|
|
|
PM Sent
|
|
|
Location:
Adelaide, South Australia
Registered:
February 2005
|
|
Re: RN41 Hilux Diff (1410mm) $350 + Tailshaft $50 + 4AG-W58 bellhousing $350
|
Fri, 25 February 2005 07:03
|
|
SOLD!
Michael
|
|
|
