| Author | Topic |
|---|
Location:
Brisbane
Registered:
February 2004
|
|
Corona wheels to a Cressida
|
Mon, 21 February 2005 18:30
|
 |
|
Hi, will wheels from an 85 corona be the same stud pattern and offset as an 85 cressida? tried to search for this but no luck, thnx.
|
|
|
Location:
Brisbane
Registered:
May 2002
|
|
Re: Corona wheels to a Cressida
|
Mon, 21 February 2005 22:40
|
|
I suspect so...
I'm not 100% sure about the corona (ST141?) but I'm pretty sure all corona's we got in Aus (i.e. not the later model FWD ones!) were 4x114.3 PCD on the wheels.
I can tell you that cressida's are 4x114.3 up until late 88 (when the MX83 came in), and I suspect offsets are close to the same. 85 should be an MX73...
Cheers
Wilbo
|
|
|
Location:
Mt Gravatt, QLD, Australi...
Registered:
May 2004
|
|
Re: Corona wheels to a Cressida
|
Mon, 21 February 2005 23:06
|
|
Corona's are 4x114.3 PCD
don't know the offset however 
|
|
|
Location:
Brisbane
Registered:
February 2004
|
|
Re: Corona wheels to a Cressida
|
Tue, 22 February 2005 03:22
|
|
|
If anyone can just tell me the offset for a MX73 Cressida and the offset of a corona, I will know then, thnx .
|
|
|
I supported Toymods
Location:
Australia
Registered:
November 2003
|
|
Re: Corona wheels to a Cressida
|
Tue, 22 February 2005 03:55
|
|
15x6, +20
or 14x5.5 +27
|
|
|
