| Author | Topic |
|---|
Location:
Newcastle
Registered:
March 2003
|
|
Dash Conversion
|
Sun, 27 February 2005 23:24
|
 |
Hey,
I'm wanting an SX(ish) dash in my ae82. What do i need? Do i need a full motor conversion or do they just slot straight in??
Thankx.
Mick
|
|
|
Location:
Brisbane (AUS)
Registered:
August 2003
|
|
Re: Dash Conversion
|
Mon, 28 February 2005 10:12
|
|
|
Are you talking about puttin a dash in your AE82 from a AE92 if so the easiest way is to get the whole dash plus the frame underneither the dash off a AE92 and also i steering coloum off a AE92 the frame pretty much bolts straight in with a little enlarging of holes so the steering coloum fits right you need to take the universal thing at the bottom of the steering coloum off your old AE82 coloum and put it on your new AE92 one you will notice that the AE82 one is a little longer this is so your new coloum will line up properly once that is done bolt it in there it is just a matter of cutting the actaul dash to the right shape of your windscreen pretty easy conversion everyone i have talked to said it was hard but i have done it and it was alot easier then i thought.
|
|
|
