| Author | Topic |
|---|
Location:
Lost in the K hole
Registered:
May 2002
|
|
flow bench ...
|
Sun, 03 November 2002 12:40
|
 |
does anyone know where i might find a friendly and CHEAP flow bench and operator who can test run the porting job ive just done on a cyl???
cheers
ed
|
|
|
I supported Toymods
Location:
Toodyay, WA
Registered:
July 2002
|
|
Re: flow bench ...
|
Sun, 03 November 2002 20:18
|
|
I know of a friendly head place, but i dont know if they can do a flow report for you. But you can give them a call and ask...
They are Thornleigh Cylinder Heads.
The guy that runs the place is Nas,
you can get them on 02 99809454
If they cant give you a flow report they could probably tell you would could.
CamZH
|
|
|
Location:
Lost in the K hole
Registered:
May 2002
|
|
Re: flow bench ...
|
Sun, 03 November 2002 23:24
|
|
thanks, i was actually after a head place to talk to today aswell...
ill give em a call.
cheers
ed
|
|
|
I supported Toymods
Location:
I renounced punctuation
Registered:
May 2002
|
|
Re: flow bench ...
|
Sun, 03 November 2002 23:56
|
|
|
Get both heads flowed......see which one has the best potential.
|
|
|
Location:
Lost in the K hole
Registered:
May 2002
|
|
Re: flow bench ...
|
Mon, 04 November 2002 03:41
|
|
NAS is a way nice guy huh!!
decent rates too:
$150 + gst for 3 angle seat cut and valve grind (24 valves)
$110 + gst for flow bench comparison of heads
$12 + gst for k line (?sp) valve stem guides
- heres hoping my stem guides are ok 
cheers
ed
|
|
|
I supported Toymods
Location:
Toodyay, WA
Registered:
July 2002
|
|
Re: flow bench ...
|
Mon, 04 November 2002 09:10
|
|
Yeah, Nas is pretty cool
I'll be taking my Cleveland blocks to him soon, i've already spent $1k on a set of heads for my old V8 with him, so hes kinda friendly to me
But hes just that kinda guy!
CamZH
|
|
|
