| Author | Topic |
|---|
Location:
Melbourne
Registered:
March 2003
|
|
Changing injecotrs on 3TGTE
|
Thu, 03 March 2005 05:27
|
 |
Iam about to install 7MGTE injectors into my 3TGTE. I have had a look at the situation and am confident I could manage it by pulling the intake side completely apart, just wondering if this is necessery or not?? Or what exactly I do and dont need to remove?
Thanks
Pip
|
|
|
Location:
Terrigal
Registered:
May 2002
|
|
Re: Changing injecotrs on 3TGTE
|
Thu, 03 March 2005 06:04
|
|
I've been able to do it with just removing the 2 bolts that hole the fuel rail in and of course removing the plugs from the injectors and the fuel lines.
It definately makes it easier to remove plenum.. But not totally necessary.
|
|
|
Location:
Melbourne
Registered:
March 2003
|
|
Re: Changing injecotrs on 3TGTE
|
Thu, 03 March 2005 06:42
|
|
cool, thats exactly what I needed to know, I'll give it a crack tomorow.
thanks
|
|
|
Location:
Liverpool
Registered:
February 2005
|
|
Re: Changing injecotrs on 3TGTE
|
Thu, 03 March 2005 07:10
|
|
Talking about injectors, is there anything stamped on them to say what size they are? I was told the ones in my 3TGTE were replaced with 1000cc injectors. Does that sound right or are they huge?
scuse the ignorance.
Cheers, Greg.
|
|
|
Location:
Melbourne
Registered:
March 2003
|
|
Re: Changing injecotrs on 3TGTE
|
Thu, 03 March 2005 07:38
|
|
|
yeah they are very big, I think the stockies are somewhere around 250cc, not sure exactly though
|
|
|
