| Author | Topic |
|---|
I supported Toymods
Location:
Australia
Registered:
November 2003
|
|
|
I supported Toymods
Location:
Epping, Sydney
Registered:
May 2002
|
|
Re: Complete MA61 Part out.
|
Fri, 04 March 2005 09:45
 
|
 |
first dibs on:
* seatbelts if they're in good nick (fronts mainly)
* power window switch covers
the little plastic trim bits that go over the side mirrors (on the inside)
centre console, if it's in good nick
|
|
|
I supported Toymods
Location:
Epping, Sydney
Registered:
May 2002
|
|
Re: Complete MA61 Part out.
|
Fri, 04 March 2005 09:48
|
|
also, if the stereo only occupies half the space, I want the little cover/tray thing that goes over the other half (not sure if supras got this)
and the little dash vent thingies, if they're unbroken.
that's all for now.. if you were in sydney I'd take a whole lot more
|
|
|
Location:
Rocklea qld
Registered:
February 2003
|
|
Re: Complete MA61 Part out.
|
Fri, 04 March 2005 09:54
|
|
|
i want dibs on the power window motors, the arm rests with the power window switches if thats not what draven wants, the rear end (diff centre, housing, axles, brakes etc etc depending on frieght cost at this stage) passenger door handle, few other things when i think of them...how much for all that though
|
|
|
I Supported Toymods
Location:
melbourne.vic.au
Registered:
May 2002
|
|
Re: Complete MA61 Part out.
|
Fri, 04 March 2005 10:00
|
|
How much do you want for the trip computer including all the plugs and loom that sits ontop/below the radio?
Cheers.
|
|
|
I supported Toymods
Location:
Epping, Sydney
Registered:
May 2002
|
|
Re: Complete MA61 Part out.
|
Fri, 04 March 2005 10:05
|
|
I've got the switches - just need the plastic cover that goes over them 
|
|
|
I Supported Toymods
Location:
melbourne.vic.au
Registered:
May 2002
|
|
Re: Complete MA61 Part out.
|
Fri, 04 March 2005 10:11
|
|
| draven wrote on Fri, 04 March 2005 20:48 |
also, if the stereo only occupies half the space, I want the little cover/tray thing that goes over the other half (not sure if supras got this)
|
Get the pocket from an SV21 and turn it upside down, or if you can't find one, most Toyotas with a pocket under the radio will fit, mine is off a VCV10 (Wide body Camry)... Get it from Toyota or pay a wrecker no more then AUD$10.
Cheers.
|
|
|
I supported Toymods
Location:
Australia
Registered:
November 2003
|
|
Re: Complete MA61 Part out.
|
Fri, 04 March 2005 10:11
|
|
| draven wrote on Fri, 04 March 2005 17:45 |
first dibs on:
* seatbelts if they're in good nick (fronts mainly)
* power window switch covers
the little plastic trim bits that go over the side mirrors (on the inside)
centre console, if it's in good nick
|
Seatbelts stuffed (fronts has wet seatbelt syndrome)
Rear are non-retractable
Passengers power window switch is perfect, drivers is fucked, but has auto up and auto down button (currently not hooked up)
Console is good.
| draven wrote on Fri, 04 March 2005 17:48 |
also, if the stereo only occupies half the space, I want the little cover/tray thing that goes over the other half (not sure if supras got this)
and the little dash vent thingies, if they're unbroken.
that's all for now.. if you were in sydney I'd take a whole lot more
|
Sorry cruise computer sits there.
little dash vent thingys are a tad broken.
| people100 wrote on Fri, 04 March 2005 17:54 |
i want dibs on the power window motors, the arm rests with the power window switches if thats not what draven wants, the rear end (diff centre, housing, axles, brakes etc etc depending on frieght cost at this stage) passenger door handle, few other things when i think of them...how much for all that though
|
Window motors are fine, drivers side clicks but I think thats an alignment problem. And that is what Draven wants.
3.73 open centre at the moment. All in good nick though, Freight wont be cheap
Door handle there, but prefer to sell whole black interior as one
| ZZT231 wrote on Fri, 04 March 2005 18:00 |
How much do you want for the trip computer including all the plugs and loom that sits ontop/below the radio?
Cheers.
|
Sorry, 99% chance its going in next car. Will be 95% accurate for next car. Its set up for 182cc injectors.
|
|
|
I supported Toymods
Location:
Epping, Sydney
Registered:
May 2002
|
|
Re: Complete MA61 Part out.
|
Fri, 04 March 2005 10:19
|
|
aw.. well that kinda sucks 
dont need the passenger one so much - drivers was the biggie, as I have the auto up/down cover and a non-auto switch.
so all that's let is the console... I have an ra65 one, so I'll see how that goes fitting before cemeting my claim on that (will check over the weekend)
|
|
|
Location:
Ballarat, Victoria
Registered:
March 2003
|
|
Re: Complete MA61 Part out.
|
Fri, 04 March 2005 12:46
|
|
has it got the black roof spoiler? what condition is it like? any pics?
thats all i can think of for the moment... 
|
|
|
I supported Toymods
Location:
Australia
Registered:
November 2003
|
|
Re: Complete MA61 Part out.
|
Fri, 04 March 2005 13:00
|
|
| Evil_Foetus wrote on Fri, 04 March 2005 20:46 |
has it got the black roof spoiler? what condition is it like? any pics?
|
Just tried to take a pic, but its too dark for the flash to do it justice.
But its greyish, with the centre post removed, as it was installed on an XX (its not factory)
I can snap some pictures over the weekend if you like, and post it straight away, as its not essential to me.
|
|
|
Location:
Ballarat, Victoria
Registered:
March 2003
|
|
Re: Complete MA61 Part out.
|
Sat, 05 March 2005 00:23
|
|
| CrUZsida wrote on Sat, 05 March 2005 00:00 |
| Evil_Foetus wrote on Fri, 04 March 2005 20:46 |
has it got the black roof spoiler? what condition is it like? any pics?
|
Just tried to take a pic, but its too dark for the flash to do it justice.
But its greyish, with the centre post removed, as it was installed on an XX (its not factory)
I can snap some pictures over the weekend if you like, and post it straight away, as its not essential to me.
|
cool, pics would be great. the spoiler on my new supra is pretty shagged, so i figured it may be cheaper to get another one...
|
|
|
I supported Toymods
Location:
Australia
Registered:
November 2003
|
|
|
I supported Toymods
Location:
Australia
Registered:
November 2003
|
|
|
Location:
Rocklea qld
Registered:
February 2003
|
|
Re: Complete MA61 Part out.
|
Sat, 05 March 2005 11:19
|
|
|
so its not a lsd then...im after the outside door handle also not the inside if that help....how much for the complete rear anyway including brakes and everything
|
|
|
Location:
Perth
Registered:
August 2003
|
|
Re: Complete MA61 Part out.
|
Sat, 05 March 2005 13:10
|
|
|
how much for the digi dash, fuel sender and wiring?
|
|
|
I Supported Toymods
Location:
melbourne.vic.au
Registered:
May 2002
|
|
|
Location:
Lost in the K hole
Registered:
May 2002
|
|
Re: Complete MA61 Part out.
|
Sun, 06 March 2005 09:00
|
|
| draven wrote on Fri, 04 March 2005 20:45 |
first dibs on:
* seatbelts if they're in good nick (fronts mainly)
* power window switch covers
the little plastic trim bits that go over the side mirrors (on the inside)
centre console, if it's in good nick
|
dude, i still ha the switch covers here that you wanted?
|
|
|
Location:
Lost in the K hole
Registered:
May 2002
|
|
Re: Complete MA61 Part out - 1meg worth of pics!
|
Sun, 06 March 2005 09:01
|
|
im chasing front drivers side indicator lens...
anyone???
cheers
ed
|
|
|
I supported Toymods
Location:
Epping, Sydney
Registered:
May 2002
|
|
Re: Complete MA61 Part out - 1meg worth of pics!
|
Sun, 06 March 2005 09:10
|
|
crap, forgot you had them ed
and the battery tray
next time I have a weekend off I'll give ya a call... shouldn't be more than 2 weeks
|
|
|
I supported Toymods
Location:
Australia
Registered:
November 2003
|
|
Re: Complete MA61 Part out - 1meg worth of pics!
|
Sun, 06 March 2005 11:50
|
|
Ok, things that are taken.
Hatch - JCMF
Sunroof Panel - JCMF
Rear Brakes - JCMF
Centre Console - JCMF (Sorry Greg, but he is replacing it with a lesser condition bit)
Auto Up, Auto Down button - JCMF
Sunroof wind deflector arms - Maniac
Corner window thingy's - Draven (pass side is good, drivers side clips have broken, but externally looks good)(JCMF *might* want your AutoUp/Down cover though, I'm not sure if his is broken)
people100 - can you clarify what you want?
I can replace the brakes from the rear with a solid disc version, but JCMF has the vented ones sorry. The rest can be yours (diff, cradle, axels, control arms etc etc), but I don't have the time to organise freight for heavy items, so unless you have someone in Perth who can collect it and package it sorry. (I work 8-6 mon-fri so cannot get to drop anything off anywhere except Aust Post)
Electric window winders are yours if you want, as are the switches and some wiring, and the passenger door handle.
However, I don't want to separate the interior just yet, so inside handles not available yet.
Jackel - PM'd
Parts are up for grabs now (besides what I'm keeping and whats been shotgunned).
Will be a good 2-3 weeks before car will be stripped.
Its still my daily driver.
|
|
|
I supported Toymods
Location:
Epping, Sydney
Registered:
May 2002
|
|
Re: Complete MA61 Part out - 1meg worth of pics!
|
Sun, 06 March 2005 12:38
|
|
up down things?
I have no diea what you're talking about
i dont especially mind that the clips are broken... I can just glue them if I get too frustrated
no troubles on the centre console - as I said, don't hold it
|
|
|
Location:
Gold Coast, QLD
Registered:
April 2004
|
|
Re: Complete MA61 Part out - 1meg worth of pics!
|
Mon, 07 March 2005 03:02
|
|
If the switch behind the indicator stalk (next to the dash light dimmer) is a fog/driving lamp switch and is not yet spoken for I'd be interested.
-Matt
|
|
|
I supported Toymods
Location:
Adelaide
Registered:
July 2004
|
|
Re: Complete MA61 Part out - 1meg worth of pics!
|
Mon, 07 March 2005 03:15
|
|
|
any chance you would want to sell me the gearknob?
|
|
|
Location:
Launceston, Tasmania
Registered:
October 2003
|
|
Re: Complete MA61 Part out - 1meg worth of pics!
|
Mon, 07 March 2005 06:38
|
|
I want first dibs on the passenger side electric mirror please. Must be in good condition. Is it possible to email pic to richloring@hotmail.com
Thanks
Rich
|
|
|
Location:
Rocklea qld
Registered:
February 2003
|
|
Re: Complete MA61 Part out - 1meg worth of pics!
|
Mon, 07 March 2005 08:14
|
|
|
ok im after diff,axles, brakes(solid)calipers basically everything to convert in a sa63, passenger outside door handle. the power window motors and switches. but i do not know anyone in perth. can u pm me a price anyway and ill see if its worth looking into any further
|
|
|
Location:
Perth, WA
Registered:
December 2004
|
|
Re: Complete MA61 Part out - 1meg worth of pics!
|
Mon, 07 March 2005 15:11
|
|
whats condition is the main chassis and body? just the whole stripped thing, whatevers going to be sent to the crusher...
possible for me to take it off your hands?
cheers,
Eldar.O.
|
|
|
Location:
Lost in the K hole
Registered:
May 2002
|
|
Re: Complete MA61 Part out - 1meg worth of pics!
|
Tue, 08 March 2005 01:39
|
|
ahhh - i DO need an engine under-tray: that plastic spash guard thing that sits behind the front apron and runs around under the sump!!
and still chasing a front indicator lens!! see my sig!
cheers
ed
|
|
|
I supported Toymods
Location:
Australia
Registered:
November 2003
|
|
Re: Complete MA61 Part out - 1meg worth of pics!
|
Tue, 08 March 2005 06:15
|
|
| matt86sx wrote on Mon, 07 March 2005 11:02 |
If the switch behind the indicator stalk (next to the dash light dimmer) is a fog/driving lamp switch and is not yet spoken for I'd be interested.
|
That switch is for the parking lights (front only), not the foglights.
Foglight switch is on centre console next to hand brake.
But would still prefer to keep interior whole at this stage
| MR 1GGTE wrote on Mon, 07 March 2005 11:15 |
any chance you would want to sell me the gearknob?
|
The black one no. But I have a blue one for sale if you want.
| EldarO wrote on Mon, 07 March 2005 23:11 |
whats condition is the main chassis and body? just the whole stripped thing, whatevers going to be sent to the crusher...
possible for me to take it off your hands?
|
B-pillar is bent, door doesnt match it properly.
Crease at top of C-pillar.
Rear quarter panel is completely covered in bog.
If you want it, be quick, otherwise I have plans before the crusher
| supra1jz wrote on Mon, 07 March 2005 14:38 |
I want first dibs on the passenger side electric mirror please. Must be in good condition.
|
PM'd
| people100 wrote on Mon, 07 March 2005 16:14 |
ok im after diff,axles, brakes(solid)calipers basically everything to convert in a sa63, passenger outside door handle. the power window motors and switches. but i do not know anyone in perth. can u pm me a price anyway and ill see if its worth looking into any further
|
PM'd
| ed_ma61 wrote on Tue, 08 March 2005 09:39 |
ahhh - i DO need an engine under-tray: that plastic spash guard thing that sits behind the front apron and runs around under the sump!!
and still chasing a front indicator lens!! see my sig!
|
Sorry Ed, no splash guard (doesn't have one)
And I might have a cracked indicator lens, but no good one.
|
|
|
I supported Toymods
Location:
Adelaide
Registered:
July 2004
|
|
Re: Complete MA61 Part out - 1meg worth of pics!
|
Tue, 08 March 2005 06:44
|
|
|
how much for the blue one, shipped?
|
|
|
Location:
Perth, WA
Registered:
September 2004
|
|
Re: Complete MA61 Part out - 1meg worth of pics!
|
Wed, 09 March 2005 08:34
|
|
ok here's my needs list....
sunroof arms....u know about...
Electric side mirrors....cond??
dashboard dimmer....does it work??
cheers Peewee
Dean
|
|
|
I supported Toymods
Location:
Australia
Registered:
November 2003
|
|
|
Location:
Colac, Victoria
Registered:
May 2002
|
|
Re: Complete MA61 Part out - 1meg worth of pics!
|
Wed, 09 March 2005 09:03
|
|
possibly in need of ONE stock rim - and i could be tempted for that CD player in it now - if its ready to go straight into another supra - ( ie cut off enough wireing to match to mine - or if its been plugged - bonus ..
lastly - passenger side indicator - need one in VGC
Remember these are going on my dads car - its a VVVVVG example of a stock ( as possible ) car and were trying to keep it that way
|
|
|
I supported Toymods
Location:
Australia
Registered:
November 2003
|
|
Re: Complete MA61 Part out - 1meg worth of pics!
|
Wed, 09 March 2005 10:02
|
|
| Classique71 wrote on Wed, 09 March 2005 17:03 |
possibly in need of ONE stock rim - and i could be tempted for that CD player in it now - if its ready to go straight into another supra - ( ie cut off enough wireing to match to mine - or if its been plugged - bonus ..
lastly - passenger side indicator - need one in VGC
Remember these are going on my dads car - its a VVVVVG example of a stock ( as possible ) car and were trying to keep it that way
|
Sorry dude, none of the above.
|
|
|
Location:
Colac, Victoria
Registered:
May 2002
|
|
Re: Complete MA61 Part out - 1meg worth of pics!
|
Wed, 09 March 2005 10:26
|
|
ahh crap 
|
|
|
Location:
Perth, WA
Registered:
September 2004
|
|
|
I supported Toymods
Location:
Australia
Registered:
November 2003
|
|
Re: Complete MA61 Part out - 1meg worth of pics!
|
Wed, 09 March 2005 13:41
|
|
| Maniac wrote on Wed, 09 March 2005 21:15 |
sweet how much u chasin for BOTH side mirrors?? do the motors work propery?? mine has RA60 manual mirrors atm...might need the switch aswell as im not sure if mine works.....
also the rear spoiler...mines an XX aswell would like one i dont hafta replace the glass...
|
PM'd
|
|
|
Location:
Adelaide
Registered:
September 2003
|
|
Re: Complete MA61 Part out - 1meg worth of pics!
|
Thu, 10 March 2005 00:25
|
|
How much for the inside door trims ?
Rear Cargo blind ?
Cheers
Michael B
|
|
|
I supported Toymods
Location:
Australia
Registered:
November 2003
|
|
Re: Complete MA61 Part out - 1meg worth of pics!
|
Thu, 10 March 2005 00:45
|
|
| bbaacchhyy wrote on Thu, 10 March 2005 08:25 |
How much for the inside door trims ?
Rear Cargo blind ?
|
Would prefer to sell the whole interior as one at this early stage in the game.
And as for the blind, wait till whatever Eviljack has to say.
|
|
|
Location:
Barossa valley SA
Registered:
January 2003
|
|
Re: Complete MA61 Part out - 1meg worth of pics! - Complete Black Interior
|
Thu, 10 March 2005 06:07
|
|
if you're willing to freight it, I'll take the whole interior including the centre console if available, but whatever happens I definitely want the headlight\indicator stalk assembly, the power mirror switch, and the speedo cable with elbow,
|
|
|
I supported Toymods
Location:
Australia
Registered:
November 2003
|
|
Re: Complete MA61 Part out - 1meg worth of pics! - Complete Black Interior
|
Thu, 10 March 2005 07:32
|
|
| 7mgte83 wrote on Thu, 10 March 2005 14:07 |
if you're willing to freight it, I'll take the whole interior including the centre console if available, but whatever happens I definitely want the headlight\indicator stalk assembly, the power mirror switch, and the speedo cable with elbow,
|
Will get back to you on the interior. If you can find someone to ship it, sure, or at least find a company that is open on saturday morning so I can drop it all off.
But mon-fri is no go sorry.
But as for the headlight\indicator stalk assembly, the power mirror switch, and the speedo cable with elbow, sorry, they are all taken/sold.
|
|
|
Location:
Perth, WA
Registered:
September 2004
|
|
Re: Complete MA61 Part out - 1meg worth of pics! - Complete Black Interior
|
Mon, 14 March 2005 00:29
|
|
Yeah that dimmer sounds exactly like mine....shagged.
do the backlights in your digidash work??? apparently when the dimmer dies so do the backlights...??
|
|
|
I supported Toymods
Location:
Australia
Registered:
November 2003
|
|
Re: Complete MA61 Part out - 1meg worth of pics! - Complete Black Interior
|
Mon, 14 March 2005 01:05
|
|
| Maniac wrote on Mon, 14 March 2005 08:29 |
Yeah that dimmer sounds exactly like mine....shagged.
do the backlights in your digidash work??? apparently when the dimmer dies so do the backlights...??
|
All backlights work.
|
|
|
I supported Toymods
Location:
Australia
Registered:
November 2003
|
|
|
Location:
Perth, WA
Registered:
September 2004
|
|
Re: Complete MA61 Part out - 1meg worth of pics! - Complete Black Interior
|
Tue, 15 March 2005 09:38
|
|
does it have jap tail lights?
if so im also after the black plastic surround for the tail lights.....
i think that'll just about do it
|
|
|
I supported Toymods
Location:
Australia
Registered:
November 2003
|
|
Re: Complete MA61 Part out - 1meg worth of pics! - Complete Black Interior
|
Tue, 15 March 2005 09:40
|
|
| Maniac wrote on Tue, 15 March 2005 17:38 |
does it have jap tail lights?
if so im also after the black plastic surround for the tail lights.....
i think that'll just about do it
|
Yes, jap lights, they are taken, but I'm not sure if the black panel is. Will have to chase that up.
When I strip it, come around and see what you want.
|
|
|
Location:
Brisbane
Registered:
June 2003
|
|
Re: Complete MA61 Part out - 1meg worth of pics! - Complete Black Interior
|
Tue, 15 March 2005 10:12
|
|
|
im interested in the whole car. Il speak to you on MSN about it.
|
|
|
Location:
Perth, WA
Registered:
September 2003
|
|
Re: Complete MA61 Part out - 1meg worth of pics! - Complete Black Interior
|
Mon, 21 March 2005 08:30
|
|
Peewee.. needless to say - anything that I need for the engine to run in my car, please keep aside... including wiring etc etc..
Looks like there's a serious demand for MA61 parts tho! 
ps.. how much for the drifto bonnet? wouldn't mind experimenting with some fibre glass..
Damo
TRD 83
|
|
|
I supported Toymods
Location:
Australia
Registered:
November 2003
|
|
Re: Complete MA61 Part out - 1meg worth of pics! - Complete Black Interior
|
Mon, 21 March 2005 08:33
|
|
| WA_TRD_83 wrote on Mon, 21 March 2005 16:30 |
Peewee.. needless to say - anything that I need for the engine to run in my car, please keep aside... including wiring etc etc..
ps.. how much for the drifto bonnet? wouldn't mind experimenting with some fibre glass..
|
Haha, yeah mate, that will be kept separate.
Bonnet remains with me for the time being.
|
|
|
Location:
Ballarat
Registered:
September 2003
|
|
|
Location:
Ballarat, Victoria
Registered:
March 2003
|
|
Re: Complete MA61 Part out - 1meg worth of pics! - Complete Black Interior
|
Mon, 21 March 2005 10:34
|
|
peewee mate,
anyone want the digidash? i've already got one, but i'd like the one with the 6500 redline for my 7mgte supra... what you looking at for it? does everything work?
does it all plug in the same to the original aus dash, does anyone know?
|
|
|
I supported Toymods
Location:
Australia
Registered:
November 2003
|
|
Re: Complete MA61 Part out - 1meg worth of pics! - Complete Black Interior
|
Mon, 21 March 2005 10:41
|
|
|
Sorry Ryley, sold already.
|
|
|
Location:
Perth
Registered:
August 2003
|
|
Re: Complete MA61 Part out - 1meg worth of pics! - Complete Black Interior
|
Mon, 21 March 2005 20:01
|
|
|
have you sold the digidash already? i had first dibs
|
|
|
Location:
Ballarat, Victoria
Registered:
March 2003
|
|
Re: Complete MA61 Part out - 1meg worth of pics! - Complete Black Interior
|
Mon, 21 March 2005 23:54
|
|
no worries peewee.
oh, and the spoiler isn't really feasible at the moment sorry, i think my 7m may have a BHG  so i need all the money i can get to fix it. sorry mate.
|
|
|
I supported Toymods
Location:
Australia
Registered:
November 2003
|
|
Re: Complete MA61 Part out - 1meg worth of pics! - Complete Black Interior
|
Tue, 22 March 2005 00:28
|
|
| jackel wrote on Tue, 22 March 2005 04:01 |
have you sold the digidash already? i had first dibs
|
Sold to you dude.
|
|
|
Location:
Perth
Registered:
August 2003
|
|
Re: Complete MA61 Part out - 1meg worth of pics! - Complete Black Interior
|
Tue, 22 March 2005 05:54
|
|
| CrUZsida wrote on Tue, 22 March 2005 08:28 |
| jackel wrote on Tue, 22 March 2005 04:01 |
have you sold the digidash already? i had first dibs
|
Sold to you dude.
|
ah ok sweet
|
|
|
Location:
Perth
Registered:
December 2004
|
|
Re: Complete MA61 Part out - 1meg worth of pics! - Complete Black Interior
|
Wed, 23 March 2005 11:59
|
|
heys ppls uh ive read thru most of the replys so pls forgive me for askin stuff thats gone or ppl have asked for....
uh i was wondering if i could get my hands on
1.rear disc brakes
2.diff...F series LSD??
3.wing/spolier
4.fenders is there are any
and id be happy to look thru the car before its sent to the crusher for any tid bits
cheers
MoMo
|
|
|
I supported Toymods
Location:
Australia
Registered:
November 2003
|
|
Re: Complete MA61 Part out - 1meg worth of pics! - Complete Black Interior
|
Wed, 23 March 2005 12:10
|
|
| Pr0j3kt_SA63 wrote on Wed, 23 March 2005 19:59 |
uh i was wondering if i could get my hands on
1.rear disc brakes
2.diff...F series LSD??
3.wing/spolier
4.fenders is there are any
and id be happy to look thru the car before its sent to the crusher for any tid bits
|
disc brakes are solid but they are there.
no LSD
yes, wing is there
no guard sorry
|
|
|
Location:
Perth
Registered:
October 2002
|
|
Re: Complete MA61 Part out - 1meg worth of pics! - Complete Black Interior
|
Tue, 29 March 2005 02:06
|
|
Don't s'pose you gots a spare grille? Someone ripped mine off over the weekend 
|
|
|
I supported Toymods
Location:
Australia
Registered:
November 2003
|
|
Re: Complete MA61 Part out - 1meg worth of pics! - Complete Black Interior
|
Tue, 29 March 2005 02:17
|
|
| CrUZsida wrote on Fri, 04 March 2005 16:43 |
Currently the nose, bonnet, apron, lights, guards have been spoken for
|
|
|
|
