| Author | Topic |
|---|
Registered:
June 2002
|
|
JZ Side feed injectors
|
Tue, 08 March 2005 09:11
|
 |
Has anyone here actually flow tested both 1JZ & 2JZ GTE injectors??
I had a couple of each cleaned and tested and both came out the same (within 20cc/min), that is the yellow top 1JZ & grey top 2JZ injectors.
When they are commonly refered to as 380cc for the 1JZ & 440 or 430cc for the 2JZ.
Anyone care to shed some light on this!?!?!
On a side note, do the side feed injectors from S6 RX-7's fit in the JZ fuel rail??
TIA
|
|
|
Location:
Canberra
Registered:
November 2004
|
|
Re: JZ Side feed injectors
|
Wed, 09 March 2005 01:12
|
|
|
I dont know myself, but what year/car did you get the 2JZ injectors from (obviously GTE motor, right)? I'm very curious too...
|
|
|
Location:
Perth
Registered:
October 2002
|
|
Re: JZ Side feed injectors
|
Wed, 09 March 2005 05:42
|
|
Wow! I have no answers - though I'm also curious. What readings did you get from the injectors you tested?
|
|
|
Location:
sunny coast, qld
Registered:
October 2002
|
|
Re: JZ Side feed injectors
|
Wed, 09 March 2005 06:25
|
|
well i tried to get them flow tested but the place only had the ability to clean them for some reason. Said it was because they were side feed.
Sorry i am no help either but am also interested!
|
|
|
Location:
Wollongong
Registered:
May 2002
|
|
Re: JZ Side feed injectors
|
Wed, 09 March 2005 06:35
|
|
|
My 440cc injectors all flow tested within 5% of the actual figure. Never got to test the 380cc ones before pulling them out.
|
|
|
