| Author | Topic |
|---|
Location:
Redbank Plains,near Ipswi...
Registered:
May 2002
|
|
T50 gearbox gears
|
Tue, 08 March 2005 22:47
|
 |
|
Need 1st & 2nd mainshaft gears. must be the type with press on syncro ring tapers. this is quite obvious as the tapered cone where the syncro ring sits, has an internal spline that mates with one on the gear. these could come out of a sprinter or a celica. cash waiting. thanks
|
|
|
Location:
Perth
Registered:
July 2004
|
|
Re: T50 gearbox gears
|
Wed, 09 March 2005 00:53
|
|
I have several of these gearboxes..
4spd auto off supra (5M)
1x 5spd alloy off celica (21r)
1x 5spd steel off celica (3TG)
2x 5spd T50 (3TC)
not sure on the gears and stuff, but if I can check without pulling the boxes apart..
or make an offer on complete box 
|
|
|
Forum Sponsor
Location:
Shepparton (Vic)
Registered:
May 2002
|
|
Re: T50 gearbox gears
|
Wed, 09 March 2005 21:48
|
|
|
Is this so you can have some gears cut? I have a first gear.(with small surface rust).All my 2 nd gears have welded syncro dogs. Be carefull as I believe there are a couple of different bore sizes.
|
|
|
Location:
Redbank Plains,near Ipswi...
Registered:
May 2002
|
|
Re: T50 gearbox gears
|
Sat, 12 March 2005 02:14
|
|
|
thanks andrew, all I want is the syncro cone part off them, that's why they need to be the splined version, not welded. I can make do with just 1 as I can get one out of a S54 box. I'll check dimensions and let you know. Terry
|
|
|
