| Author | Topic |
|---|
Location:
Arthurs Creek, Victoria
Registered:
May 2002
|
|
Taking off the Dizzy
|
Wed, 06 November 2002 02:13
|
 |
I want to take the dizzy off the 1g to clean all the shit off around it, but I'm concerned I'll fuck the timing right up the creek.
I am going to run the haltech IG5 aftermarket ignition computer, so, will this be a huge problem or will when I put the ignition computer on, the timing have to be reset anyway?
|
|
|
Location:
Brisbane - Chapel Hill
Registered:
June 2002
|
|
Re: Taking off the Dizzy
|
Wed, 06 November 2002 05:42
|
|
Just grab a timing light and check where it is currently. Then mark a reference so you can put it back on where it was.
Have a fiddle while youre there, it's not too hard, and you might find some extra power if you are lucky ... or some extra pinging 
|
|
|
Location:
Arthurs Creek, Victoria
Registered:
May 2002
|
|
Re: Taking off the Dizzy
|
Wed, 06 November 2002 07:13
|
|
Well, I've taking it off anyway,
I reacon it'd be something to do with cylinder 1 TDC, so it can't be too hard.
the ig5 will do it for me.
|
|
|
I supported Toymods
Location:
Perth
Registered:
May 2002
|
|
Re: Taking off the Dizzy
|
Wed, 06 November 2002 10:48
|
|
Does that mean you have a picture of the dizzy cap? 
(PS. You told me to keep remindin' ya! )
|
|
|
Location:
Arthurs Creek, Victoria
Registered:
May 2002
|
|
Re: Taking off the Dizzy
|
Wed, 06 November 2002 23:16
|
|
yep I'm ever so much closer..
Just keep reminding me..
|
|
|
Location:
c'town, NSW
Registered:
May 2002
|
|
|
I supported Toymods
Location:
Perth
Registered:
May 2002
|
|
Re: Taking off the Dizzy
|
Thu, 07 November 2002 01:24
|
|
|
Will do Strad
|
|
|
