| Author | Topic |
|---|
Location:
Sydney
Registered:
May 2003
|
|
T50 Jap Spec
|
Mon, 14 March 2005 07:34
|
 |
Hey people i am after a sprinter T50 jap spec gearbox, in sydney good condition with shifter.
PM me if you have one,
Cheers
Michael
|
|
|
Location:
Sydney
Registered:
May 2003
|
|
Re: T50 Jap Spec
|
Mon, 14 March 2005 11:26
|
|
|
BUMP...
|
|
|
Location:
Melbourne
Registered:
May 2004
|
|
Re: T50 Jap Spec
|
Tue, 15 March 2005 00:29
|
|
Im pretty sure the box is exactly the same as the Aus spec T50.
The only difference is is that the Jap spec T50 has a different bellhousing in the way that you r clutch slave is on the drivers side instead the passsenger side.
If you go to a wrecker or something and tell them you need specifically a jap spec they will shit all over ya and then take all your money!
Hope this helps,
Jezza
|
|
|
Location:
Sydney
Registered:
May 2003
|
|
Re: T50 Jap Spec
|
Tue, 15 March 2005 01:08
|
|
Yeah mate i need the clutch slave on the drivers side. Thats the point. Its going into my ke25 and i need to hook up the slave cylinder which i need on tht side.
Thanks anyways..
Michael
|
|
|
Location:
Melbourne
Registered:
May 2004
|
|
Re: T50 Jap Spec
|
Tue, 15 March 2005 06:01
|
|
Pm a guy Henn on these forums re the Jap spec bellhousing to mount your slave on the other side.
Then all ya need is the gearbox from Aus spec.
Jezza
|
|
|
Location:
Surfers Paradise, Queensl...
Registered:
May 2002
|
|
Re: T50 Jap Spec
|
Tue, 15 March 2005 06:37
|
|
|
The worm speedo drive can be different.
|
|
|
Location:
Sydney
Registered:
May 2003
|
|
Re: T50 Jap Spec
|
Tue, 15 March 2005 12:11
|
|
I just want a T50 Jap Spec. Not an Aus Spec as it is not what i want.
Now does anyone actually have one or do people just wanna try and convince me they're not different?
Michael
|
|
|
Location:
Surfers Paradise, Queensl...
Registered:
May 2002
|
|
Re: T50 Jap Spec
|
Tue, 15 March 2005 13:11
|
|
|
the gearbox is the same. the bell housing is different and the worm drive is possibly different but can be changed easily.
|
|
|
Forum Sponsor
Location:
Shepparton (Vic)
Registered:
May 2002
|
|
Re: T50 Jap Spec
|
Tue, 15 March 2005 22:19
|
|
|
I have several JDM boxes. They usually have roller bearings rather than ball races. E mail me for prices and alternatives
|
|
|
Location:
Sydney
Registered:
May 2003
|
|
Re: T50 Jap Spec
|
Wed, 16 March 2005 01:48
|
|
E-mail sent,
Thanks for the reply,
Michael
|
|
|
Location:
Adelaide SA
Registered:
February 2005
|
|
Re: T50 Jap Spec
|
Mon, 21 March 2005 05:39
|
|
I CAN SELL YOU ONE FOR CHEEP!!!
PM ME
THANKS
KRISTY
|
|
|
Location:
Townsville
Registered:
February 2005
|
|
Re: T50 Jap Spec
|
Tue, 22 March 2005 13:55
|
|
I think T-18's have the slave on the drivers side too. Im pretty sure thats the side I noticed it to be on.
Not really parting with either of ours at this stage, sorry.
|
|
|
