| Author | Topic |
|---|
I Supported Toymods
Location:
south Melbourne/KL
Registered:
June 2004
|
|
4age ecu/wiring (?) problem
|
Sun, 20 March 2005 04:51
|
 |
had my car parked under the hot sun today. the heat screwed up the double sided tape on my SAFC1. when i came back the safc was dangling on its wire. this probably made one of the wires in the safc lose as it did not light up anymore.
when i started the engine, the check light came on. so probably some wiring screw up inside the safc. i then disconected the safc and the check light was still on. i then reset ecu with safc disconected and check light was still on.
i then drove to my friends place near bye. as i was driving the car sounded like it had 1 spark plug dead, or one of them wasnt firing, or some kinda ignition problem.
so what could be wrong or how to check??
|
|
|
Location:
Kita-Ku, Sapporo, Japan
Registered:
January 2003
|
|
Re: 4age ecu/wiring (?) problem
|
Sun, 20 March 2005 12:39
|
|
do you have wiring diagrams as to how it is all conected together? get out your multimeter and start checking wire continuity and signals.
other than that, a _good_ auto elec.
|
|
|
I Supported Toymods
Location:
south Melbourne/KL
Registered:
June 2004
|
|
Re: 4age ecu/wiring (?) problem
|
Sun, 20 March 2005 14:10
|
|
|
the part connecting to the ecu was not affected.its the wire AT THE SAFC that was pulled.
|
|
|
Location:
Kita-Ku, Sapporo, Japan
Registered:
January 2003
|
|
Re: 4age ecu/wiring (?) problem
|
Sun, 20 March 2005 23:43
|
|
| b1gb3n wrote on Mon, 21 March 2005 01:10 |
the part connecting to the ecu was not affected.its the wire AT THE SAFC that was pulled.
|
no shit, i read your post.
the fact that it is the SFA controller changes nothing.
get out your wiring diagrams, get out a multimeter and start checking. if it is beyond you, take it to a good auto elec.
|
|
|
I Supported Toymods
Location:
south Melbourne/KL
Registered:
June 2004
|
|
Re: 4age ecu/wiring (?) problem
|
Mon, 21 March 2005 00:24
|
|
 hate it when things are beyond me
|
|
|
Location:
Kita-Ku, Sapporo, Japan
Registered:
January 2003
|
|
Re: 4age ecu/wiring (?) problem
|
Mon, 21 March 2005 00:28
|
|
|
that's what auto electricians are for.
|
|
|
Club Member
Location:
sydney
Registered:
May 2002
|
|
Re: 4age ecu/wiring (?) problem
|
Mon, 21 March 2005 05:45
|
|
what about underated back yard mechanics, is that what were for too... i hope so, cause i never want to see another resistor or diode for a looong time after doing the dash 
|
|
|
I Supported Toymods
Location:
south Melbourne/KL
Registered:
June 2004
|
|
Re: 4age ecu/wiring (?) problem
|
Mon, 21 March 2005 05:58
|
|
| IRA11Y wrote on Mon, 21 March 2005 16:45 |
what about underated back yard mechanics, is that what were for too... i hope so, cause i never want to see another resistor or diode for a looong time after doing the dash
|
i agree. i will have to device a plan for improvedae86 to show up at my hse
|
|
|
Location:
Kita-Ku, Sapporo, Japan
Registered:
January 2003
|
|
Re: 4age ecu/wiring (?) problem
|
Mon, 21 March 2005 06:00
|
|
| b1gb3n wrote on Mon, 21 March 2005 16:58 |
| IRA11Y wrote on Mon, 21 March 2005 16:45 |
what about underated back yard mechanics, is that what were for too... i hope so, cause i never want to see another resistor or diode for a looong time after doing the dash
|
i agree. i will have to device a plan for improvedae86 to show up at my hse
|
easy, just offer a few hundred dollars per hour  that will get most ppl to help  even if they don't like you...
|
|
|
Club Member
Location:
sydney
Registered:
May 2002
|
|
Re: 4age ecu/wiring (?) problem
|
Mon, 21 March 2005 06:16
|
|
|
people dont like me???!! OMG im doomed!!
|
|
|
