Does anyone have an Idea how difficult/possible to change the seals in/around the auto gearbox as I think my SA63 has the front seal of the gearbox gone on it
Location: East Maitland NSW
Registered: December 2004
Re: Auto Trans seals...
Thu, 31 March 2005 10:17
The gear box must be taken out (thats pretty obvious) Use a flat blade screwdriver with a small end and hit the seal in between the seal and the pump on the box. Put a new seal in hitting it evenly on all the way around the edge with a hammer. be sure to loctite as it may come out when driving.
Thu, 31 March 2005 07:52
