| Author | Topic |
|---|
Location:
sydney
Registered:
March 2005
|
|
wtb 4agze low-comp pistons, rods, bearings and rings
|
Fri, 01 April 2005 04:57
|
 |
|
as the title says. if there is a difference in pistons for these model engines let me know. the 4agze is in a ae86 incase that helps.
|
|
|
Location:
Sydney
Registered:
September 2004
|
|
Re: wtb 4agze low-comp pistons, rods, bearings and rings
|
Mon, 11 April 2005 03:52
|
|
|
there are 2 kinds of pistons for the GZE. The the later one's have 8.9:1 comp ratio. The early one's have 8.1:1(?) I think. You can get them new from toyota.
|
|
|
Location:
Launceston, Tasmania
Registered:
May 2002
|
|
Re: wtb 4agze low-comp pistons, rods, bearings and rings
|
Mon, 11 April 2005 06:31
|
|
|
they are relatively cheep at $400 for a brand new set from toyota too!
|
|
|
Location:
sydney
Registered:
March 2005
|
|
Re: wtb 4agze low-comp pistons, rods, bearings and rings
|
Mon, 11 April 2005 21:06
|
|
will the difference be that the latter ones wont fit in the newer engine?
| Big T wrote on Mon, 11 April 2005 13:52 |
there are 2 kinds of pistons for the GZE. The the later one's have 8.9:1 comp ratio. The early one's have 8.1:1(?) I think. You can get them new from toyota.
|
|
|
|
Location:
Bundaberg, Qld.
Registered:
May 2002
|
|
Re: wtb 4agze low-comp pistons, rods, bearings and rings
|
Tue, 12 April 2005 22:09
|
|
both pistons have the same gugeon pin size, just different c/r.
what engine do you want all this for?
|
|
|
Location:
sydney
Registered:
March 2005
|
|
Re: wtb 4agze low-comp pistons, rods, bearings and rings
|
Thu, 14 April 2005 21:05
|
|
i think its out of the ae92. but im really not sure
| feral4mr2 wrote on Wed, 13 April 2005 08:09 |
both pistons have the same gugeon pin size, just different c/r.
what engine do you want all this for?
|
|
|
|
Location:
Bundaberg, Qld.
Registered:
May 2002
|
|
Re: wtb 4agze low-comp pistons, rods, bearings and rings
|
Thu, 14 April 2005 23:03
|
|
bigport or smallport engine? i am not familuar with what the rolla's had.
just asking as if its a later bigport 88 > or a smallport engine then you should only need to source some pistons. the rods wont need to be changed.
the rings and bearing can be bought at any autoparts store.
|
|
|
