| Author | Topic |
|---|
Location:
Adelaide, South Australia
Registered:
February 2005
|
|
FS: RA28 with worked 18-RGU
|
Sat, 02 April 2005 07:25
|
 |
I've decided i'm selling my CAR! I've been at the stage where i'm at once before, and i don't think i have it in me again to do it after crashing my last red RA28 that i had a few years back.
So here it goes!
It's 1977 Toyota Celica RA28 (Mustang Shape)
It's all be primered in RED and has had all the rust removed. Still needs a little work to the body.
The stand out with this Celica that this one has a registered worked NA 18-RGU under the hood, generating around 140 hp to the rear wheels. Before the full re-build i had on this motor in 2003, where i got the compression knocked down to 10.75:1 from 11.5:1 where it was at, i ran a 14.2 quarter mile with this motor in my old shell.
I have so many parts that go with this car it isn't funny. It has an electronic 3/8" fuel system on it with an VDO regulator, Twin 45mm Webbers, Stage 2 Waggot Cams, TRD Forged Pistons, 2 1/4 inch exhaust into a 5" polished cannon.
Also, i have a Hilux rear end with 4.88:1 LSD Gears to go with it as well.
I will get pictures of the entire car up if people are keen.
Throw me your offers.
Michael
[Updated on: Sat, 02 April 2005 13:18]
|
|
|
Location:
Adelaide, SA
Registered:
November 2003
|
|
Re: FS: RA28 with worked 18-RGU
|
Sat, 02 April 2005 14:34
|
|
What type of condition is your shell in? Where has rust been removed? I Wouldnt mind seeing a couple pics of the body 
Mabey i should get of my a$$ and take a look at it lol
I know people hate being asked this but do you have a ballpark figure? I'd make an offer but i havent seen the body yet.
Thanks
Troy
|
|
|
Location:
melbourne
Registered:
February 2005
|
|
Re: FS: RA28 with worked 18-RGU
|
Sun, 03 April 2005 12:13
|
|
post up pix of the outer body not just the engine bay... wat range roughly u lookin at?
|
|
|
Location:
Adelaide, South Australia
Registered:
February 2005
|
|
Re: FS: RA28 with worked 18-RGU
|
Sun, 03 April 2005 23:29
|
|
Pictures will be up tonight.
Here are some other things that are included, along with how the car would normally come...
1 x Extra set of Trim
2 x spare W50 gearboxes
1 x spare W55 gearbox
1 x spare 18-RC engine
1 x spare right guard
1 x alarm system not fitted yet
1 x central locking kit not fitted yet
1 x 2ltrs of Chrysler Viper Red paint
1 x Hilux Rear end with 4.88:1 LSD Gears
1 x Spare "like new" rear chrome bumper
I've spent so much on this car along with my old one, and i would not take any less than $5000 for everything. Someone has already expressed interest here in Adelaide and is coming down tomorrow. I might sell it cheaper without the motor.
Thanks,
Michael
|
|
|
Location:
Adelaide, SA
Registered:
November 2003
|
|
Re: FS: RA28 with worked 18-RGU
|
Mon, 04 April 2005 00:00
|
|
| mcostalos wrote on Mon, 04 April 2005 08:59 |
in Adelaide and is coming down tomorrow.
|
I might have to check on that. i could be stuck at tafe tomorrow (DAMMIT), ill have to sort something out, ill find out this afternoon anyway. Did i mention that im over an hours drive from you lol. Ohh well at least your in SA.
Ohh and what alarm is being included with the car?
Cheers mate.
Troy
|
|
|
Location:
Adelaide, South Australia
Registered:
February 2005
|
|
|
