Toymods Car Club
www.toymods.org.au
F.A.Q. F.A.Q.    Register Register    Login Login    Home Home
Members Members    Search Search
Toymods » Tech & Conversions » MA61 wheel + LN106 caliper = ?

Show: Today's Posts  :: Show Polls 
Email to friend 
Switch to threaded view of this topic Create a new topic Submit Reply
AuthorTopic
September_Squall
Forums Junkie


Location:
Melbourne, Australia
Registered:
March 2005
MA61 wheel + LN106 caliper = ? Tue, 05 April 2005 06:52 Go to next message
Hi,

Done a search, basic gist of it was
1. a few 14's fit, but not all; and
2. most people with LN106 or equivilent use 15s

I'll dummy it up over the next few days if nobody is really sure.

So what's the story? Does it fit or doesn't it? If not, why not? Does it foul on the outside of the caliper or the face of the caliper?

Thanks in advance.
  Send a private message to this user    
September_Squall
Forums Junkie


Location:
Melbourne, Australia
Registered:
March 2005
Re: MA61 wheel + LN106 caliper = ? Tue, 05 April 2005 15:05 Go to previous message
Thanks for the feedback guys... hehehe

Just dummied it up, the innermost of three ridges on the face of the caliper when mounted slightly fouls on the inside of the MA61 wheel spokes. It's real close. I'm going to die grind this ridge down a bit (or maybe flush with the caliper face) and expect all to be fine.

If you really wanted a small spacer on the hub would lift the wheel clear. Only need a few millimetres.

The outside of the caliper seems to adequately clears the inner wheel circumference.

Hope this info helps someone.

[Updated on: Tue, 05 April 2005 15:06]

  Send a private message to this user    
  Switch to threaded view of this topic Create a new topic Submit Reply
Previous Topic:clutch ? no idea
Next Topic:Corona 2sc
Goto Forum:
-=] Back to Top [=-

Current Time: Mon Jul 21 23:33:52 UTC 2025

Total time taken to generate the page: 0.004101037979126 seconds

Bandwidth utilization bar

.:: Contact :: Home ::.

Powered by: FUDforum 2.3.8
Copyright ©2001-2003 Advanced Internet Designs Inc.