| Author | Topic |
|---|
Location:
Melbourne
Registered:
April 2003
|
|
1GGTE Rev Limit
|
Tue, 12 April 2005 04:20
|
 |
any one know what it should be at? on the factory computer??
|
|
|
I supported Toymods
Location:
Australia
Registered:
November 2003
|
|
Re: 1GGTE Rev Limit
|
Tue, 12 April 2005 04:33
|
|
|
7200 cut I think
|
|
|
Location:
Sydney
Registered:
May 2002
|
|
Re: 1GGTE Rev Limit
|
Tue, 12 April 2005 06:56
|
|
|
correct
|
|
|
I supported Toymods
Location:
Perth
Registered:
May 2002
|
|
Re: 1GGTE Rev Limit
|
Tue, 12 April 2005 07:49
|
|
|
This is a limit set for that fact it's not making as much power beyond this thanks to the baby turbos. The 1GGEU dash I have goes orange at 7200rpm and doesn't go hard red until 7700rpm.
|
|
|
Location:
Melbourne
Registered:
May 2002
|
|
Re: 1GGTE Rev Limit
|
Tue, 12 April 2005 08:04
|
|
|
Here here i managed to rev the utter guts out of my 1g, with a decent single turbo, i seen about 8000rpm with it.
|
|
|
Location:
Sydney
Registered:
May 2002
|
|
Re: 1GGTE Rev Limit
|
Tue, 12 April 2005 08:07
|
|
I've heard of them being revved to 10,000rpm but thats a nother story.
ofcourse you wouldnt have a factory computer on something doing that
|
|
|
Location:
Vic
Registered:
June 2003
|
|
Re: 1GGTE Rev Limit
|
Tue, 12 April 2005 08:18
|
|
|
yeh secone that, heard of them going to 10 too.
|
|
|
Location:
Pine Rivers QLD
Registered:
April 2005
|
|
Re: 1GGTE Rev Limit
|
Tue, 12 April 2005 12:08
|
|
|
i got the 1g-geu. no rev limit that i can see cause i have taken it to 7750 (one light from the top) and it didn't seem to be slowing down. the lights started to go red too so i thought i should back off.
|
|
|
I supported Toymods
Location:
Northern Beaches
Registered:
May 2002
|
|
Re: 1GGTE Rev Limit
|
Tue, 12 April 2005 22:28
|
|
|
yea when I bounce off rev limiter and then check to see what I got on the SAFC it is about 7250
|
|
|
Location:
Sydney
Registered:
May 2002
|
|
Re: 1GGTE Rev Limit
|
Wed, 13 April 2005 01:46
|
|
oh the other thing about going to 10,000rpm is the valve stem seals implode so you need to upgrade them 
|
|
|
Location:
Yowie Bay, Sydney
Registered:
June 2002
|
|
Re: 1GGTE Rev Limit
|
Wed, 13 April 2005 09:04
|
|
ay ribbo, u need to change ur avatar pic
and bring MY car round so i can drive it again 
|
|
|
Location:
Melbourne
Registered:
May 2002
|
|
Re: 1GGTE Rev Limit
|
Wed, 13 April 2005 09:14
|
|
|
You would also need to upgrade your valve springs in the 1g as i really doubt they can handle 10krpm without letting the valves slap pistons, not to mention that you would also prob need a big arse cam with some nice light valves. Food for thought.
|
|
|
