| Author | Topic |
|---|
I supported Toymods
Location:
south of the big smoke
Registered:
May 2002
|
|
2tg with extractors
|
Thu, 14 November 2002 11:57
|
 |
im thinking about making a 3t/2t hybrid depending on the replies to this post
anyone got a 2tg they wanna off load the bottom end can be stuffed as long as the head and solexs are fine
cheers
|
|
|
I supported Toymods
Location:
melbourne.victoria.austra...
Registered:
June 2002
|
|
Re: 2tg with extractors
|
Fri, 15 November 2002 04:06
|
|
you need a bit more than the head dude, front timing gear cover, dummy cam to drive dizzy and oil pump, and other shits and bits
trust me - get a 2TG and ditch the bits you don't need...
|
|
|
Registered:
May 2002
|
|
Re: 2tg with extractors
|
Fri, 15 November 2002 06:09
|
|
Is there any advantage of a 2/3tg hybrid over an 18rg ?
both make similar power .sure the 2t/3tg will bolt straight into a ta2# but the 18 rg is a hell of a lot cheaper
|
|
|
Registered:
May 2002
|
|
Re: 2tg with extractors
|
Fri, 15 November 2002 08:04
|
|
but the hybrid will rev at LOT easier/quicker. the 18rg is also very heavy (therefore weigh down the front) and difficult to put into a TA22 (especially if you want it legal- major upgrades required).
2TGs are also in my experience more common, therefore easier to get parts for.
I've got a spare 'yamaha head' (#260) 2TGEU complete with full EFI gear, but i wouldn't separate the head and block for any less than $400.
rob
|
|
|
Location:
Carlingford, Sydney
Registered:
May 2002
|
|
Re: 2tg with extractors
|
Fri, 15 November 2002 23:06
|
|
hey inferno
you wouldnt happen to have a spare 2TG fuel rail would you?
|
|
|
Registered:
May 2002
|
|
Re: 2tg with extractors
|
Sat, 16 November 2002 02:54
|
|
well i've got a nice shiny fuel rail here... $400 and it comes with a complete efi setup!
just gave dave at 'Sleeka spares' a call here in adelaide for ya, he's got EVERYTHING, including a 2TGEU fuel rail for $30.
if i was feeling a little less lazy i could go down there, buy it, then COD it for ya. u'll have to pay the petrol but! or i could swap it for an external timing chain tensioner. give me an email if your interested.
rob
consid@tpg.com.au
BTW oz_craig, sleeka spares has plenty of 2TGEU heads for around $150-200. sleeka spares number is (08)83596446
|
|
|
Location:
Carlingford, Sydney
Registered:
May 2002
|
|
Re: 2tg with extractors
|
Sat, 16 November 2002 05:47
|
|
how far away is it from you?
if i get u t buy it for $30 + $10 for your work/fuel and send it to me cod would that be alright?
|
|
|
Registered:
May 2002
|
|
Re: 2tg with extractors
|
Sat, 16 November 2002 08:21
|
|
yep no probs mate, the $10 will cover packaging aswell. I'm not sure if its got the fuel regulator attached but.
I've got uni exams 'till wednesday, so won't post it until maybe thursday, which means u won't get it until early next week.
send your address and details via email and i'll post it COD.
|
|
|
Location:
Carlingford, Sydney
Registered:
May 2002
|
|
Re: 2tg with extractors
|
Sat, 16 November 2002 09:00
|
|
ok will do 
yeah next week is fine as well
thanks very much for this
|
|
|
I supported Toymods
Location:
south of the big smoke
Registered:
May 2002
|
|
|
Location:
Carlingford, Sydney
Registered:
May 2002
|
|
Re: 2tg with extractors
|
Sat, 16 November 2002 09:53
|
|
|
i might have a set of 2tg extractors for sale early next year
|
|
|
Registered:
May 2002
|
|
Re: 2tg with extractors
|
Mon, 18 November 2002 22:43
|
|
I have a set of extractors you can have.
They are 4-2-1 Perry extractors in good order. Had them running on the standard 2T and it made a huge difference. Will sell for $70
I'm in Adelaide.
Frank
|
|
|
I supported Toymods
Location:
south of the big smoke
Registered:
May 2002
|
|
Re: 2tg with extractors
|
Tue, 19 November 2002 21:19
|
|
inferno, are u selling the whole engine for 400 or just the head ?
just having trouble interpreting an earlier post
tar
craig
|
|
|
Registered:
May 2002
|
|
Re: 2tg with extractors
|
Wed, 20 November 2002 12:26
|
|
sorry about the confusion.. i've got a complete 2TGEU with everything needed to run it, but i was thinking of separating the block and head from the efi gear.
In which case i would sell just the engine for around $400. This is the big valve 2TG, and would come with everything needed for a hybrid conversion except the carbies.
rob
|
|
|
Location:
Hornsby, Sydney
Registered:
October 2002
|
|
Re: 2tg with extractors
|
Wed, 18 December 2002 09:06
|
|
|
ive got a complete 2tg with out carbies. its got extractors and is in good nic if u want it. $350
|
|
|
Location:
Hornsby, Sydney
Registered:
October 2002
|
|
Re: 2tg with extractors
|
Wed, 18 December 2002 09:06
|
|
|
ive got a complete 2tg with out carbies. its got extractors and is in good nic if u want it. $350
|
|
|
Location:
Hornsby, Sydney
Registered:
October 2002
|
|
Re: 2tg with extractors
|
Wed, 18 December 2002 09:09
|
|
|
ive got a complete 2tg with out carbies. its got extractors and is in good nic if u want it. $350
|
|
|
Location:
Carlingford, Sydney
Registered:
May 2002
|
|
Re: 2tg with extractors
|
Wed, 18 December 2002 09:20
|
|
mmm temping
where abouts in sydney are you?
wouldi be able to come have a look at it?
|
|
|
Location:
Melbourne
Registered:
June 2002
|
|
Re: 2tg with extractors
|
Thu, 19 December 2002 02:50
|
|
|
I've got a complete 2TG running, needs a tune though, with 5-speed box and genie extractors. Looking at $600
|
|
|
