| Author | Topic |
|---|
I Supported Toymods
Location:
melbourne.vic.au
Registered:
May 2002
|
|
When the SA63 Stopped...
|
Thu, 28 April 2005 14:39
|
 |
Hey All,
When the SA63 with a T-Series Diff stops in rush hour traffic in the City and then gets pushed out of the traffic... This is the reason...
* Damn T-Series, will check tomorrow to see if the diff caused a lock up to cause the uni joints to sheer appart...
Cheers.
|
|
|
I Supported Toymods
Location:
melbourne.vic.au
Registered:
May 2002
|
|
Re: When the SA63 Stopped...
|
Sun, 01 May 2005 12:44
|
|
Here are more photos...
Cheers.
|
|
|
Location:
Tassie
Registered:
October 2003
|
|
Re: When the SA63 Stopped...
|
Sun, 01 May 2005 16:37
|
|
Spewing !
why did it happen ?
|
|
|
I supported Toymods
Location:
Epping, Sydney
Registered:
May 2002
|
|
Re: When the SA63 Stopped...
|
Sun, 01 May 2005 22:13
|
|
how?
it was the RAW POWAH of the 2s, duh 
|
|
|
I Supported Toymods
Location:
melbourne.vic.au
Registered:
May 2002
|
|
Re: When the SA63 Stopped...
|
Sun, 01 May 2005 22:30
|
|
| Mookie wrote on Mon, 02 May 2005 02:37 |
Spewing !
why did it happen ?
|
We think that the Diff died (as well thus wanting to swap with an F-Series diff as one is laying around and that no one has a T-Series center/diff) from locking up (failing) and snapping the shaft *So I think*... I don't know... All I know is that I have to replace the intermediate shaft and the diff...
Cheers.
|
|
|
I Supported Toymods
Location:
melbourne.vic.au
Registered:
May 2002
|
|
Re: When the SA63 Stopped...
|
Mon, 09 May 2005 11:12
|
|
All Fixed... I was having a "milk shake" affect when driving before it failed. Changed the Tailshaft and not the F-Series diff and all is good with no shaking 
Cheers.
|
|
|
