Author | Topic |
Location: Castle Hill, Sydney
Registered: February 2004
|
new 4age pressue plate 200mm
|
Tue, 03 May 2005 08:30
|
|
i just bought a brand new 200mm 4age pressure plate for my 2tg but it slipped, couldnt handle the mighty 2tg/3t powazz so i have to offload it
its out of the car, has a few burn marks which should rub off, it was never driven on
$110
|
|
|
Registered: May 2002
|
Re: new 4age pressue plate 200mm
|
Tue, 03 May 2005 08:52
|
|
Hey Jesse, don't know if it would have made much difference (apparently it does though) but did you have your flywheel machined with a 0.5mm step? The 4AGE clutches are meant to be used with a stepped flywheel, I don't know if the 2T/3T ones are flat or stepped?? A slightly worn friction plate and a flat flywheel would not have worked well if that was the combo.
Good luck with the sale.
|
|
|
Location: Castle Hill, Sydney
Registered: February 2004
|
Re: new 4age pressue plate 200mm
|
Tue, 03 May 2005 10:02
|
|
fly is not flat, it definately steps up for the clutch plate, not sure exactly how much but will compare it tomorrow with the 4age fly thats here
|
|
|