| Author | Topic |
|---|
Registered:
January 2004
|
|
|
Registered:
January 2004
|
|
Re: ST 205 turbo or Hiflowed CT26
|
Fri, 06 May 2005 12:40
 
|
 |
|
time to be bumped
|
|
|
Location:
Sunshine Coast
Registered:
November 2003
|
|
Re: ST 205 turbo or Hiflowed CT26
|
Sun, 08 May 2005 07:06
|
|
Hey i have a Hiflowed CT26 of a 7Mgte with receipts of rebuild done only 20 000km's ago. In perfect condition for $800
Cheers Mick
0408 214762
|
|
|
Registered:
January 2004
|
|
Re: ST 205 turbo or Hiflowed CT26
|
Sun, 08 May 2005 07:36
|
|
would it be hard to swap over , ?
|
|
|
Location:
Sunshine Coast
Registered:
November 2003
|
|
Re: ST 205 turbo or Hiflowed CT26
|
Sun, 08 May 2005 11:16
|
|
Hey,
I can't see why it wouldn't be easy to fit. They are the exact same turbo, made by the same people. Let me know what you think.
Will provide a receipt as well for the rebuild done on it. It gave my 7M 50hp more at the wheels from hiflowing it, and i have dyno sheets to prove that to.
Cheers Mick
|
|
|
Location:
christchurch (new zealand)
Registered:
April 2005
|
|
Re: ST 205 turbo or Hiflowed CT26
|
Mon, 09 May 2005 05:02
|
|
|
hey i no sumone sellin one rebuilt same as wat the otha guy said wif 3inch dump pipe $500 with or without a 3tgte exhaust manifold, said it had carbon seels and has only been driven 1000 ks
|
|
|
Location:
Sydney
Registered:
October 2003
|
|
Re: ST 205 turbo or Hiflowed CT26
|
Mon, 09 May 2005 06:44
|
|
|
I think you might find that sxy184 is after a twin entry ct26 circa gen2/gen3 3sgte. They are different beasts, interchangeable yes, but with a bit of work.
|
|
|
Location:
christchurch (new zealand)
Registered:
April 2005
|
|
|
Location:
Brisbane, Queensland
Registered:
January 2004
|
|
Re: ST 205 turbo or Hiflowed CT26
|
Tue, 10 May 2005 06:27
|
|
|
You can use the 7M turbo, you just have to swap over the exhaust housings and its home.
|
|
|
Location:
The Hills District
Registered:
November 2003
|
|
Re: ST 205 turbo or Hiflowed CT26
|
Sun, 15 May 2005 17:16
|
|
sorry if i sound like a thread stealer but no harm intended. just a quick q, would a ct26 be a direct swap for a stock ct20 on a 3tgte motor. would the 26 bolt up to the manifold on the 3t.
sorry again but thanks
|
|
|
Location:
Brisbane, Queensland
Registered:
January 2004
|
|
Re: ST 205 turbo or Hiflowed CT26
|
Sun, 15 May 2005 21:13
|
|
| sxr01r wrote on Mon, 16 May 2005 03:16 |
sorry if i sound like a thread stealer but no harm intended. just a quick q, would a ct26 be a direct swap for a stock ct20 on a 3tgte motor. would the 26 bolt up to the manifold on the 3t.
sorry again but thanks
|
I wouldn't know, but then why would you want to goto a smaller turbo?
|
|
|
Location:
Pilbara
Registered:
November 2004
|
|
Re: ST 205 turbo or Hiflowed CT26
|
Thu, 21 July 2005 03:45
|
|
|
A ct26 is not a smaller turbo mate. It's more efficient and flows more horsies than a ct20
|
|
|
I Supported Toymods
Location:
Sydney
Registered:
December 2002
|
|
Re: ST 205 turbo or Hiflowed CT26
|
Thu, 21 July 2005 04:15
|
|
I think the confusion is because of the "CT20B" ST205 turbo vs the CT20 tiny piece of shit turbo that is standard on the 3TGTE's
|
|
|
Location:
Pilbara
Registered:
November 2004
|
|
Re: ST 205 turbo or Hiflowed CT26
|
Thu, 21 July 2005 04:37
|
|
|
Tell me about it! I'm trying to source a single entry CT26 for my old 3tgteu!
|
|
|
