| Author | Topic |
|---|
Location:
Redbank Plains,near Ipswi...
Registered:
May 2002
|
|
3SG engine
|
Tue, 19 November 2002 22:31
|
 |
|
complete 3SG engine with computer, harness etc from 70,000km MR2. Ran OK. $950, no offers . can assist with RWD fitting info and parts, eg celica. location near brissy
|
|
|
I supported Toymods
Location:
Perth
Registered:
August 2002
|
 Re: 3SG engine
|
Tue, 19 November 2002 22:33
|
|
id get it for my camry but cash flow is a problem... 
|
|
|
Location:
Terrigal
Registered:
May 2002
|
|
Re: 3SG engine
|
Tue, 19 November 2002 23:46
|
|
|
Know anything about fitting this to a AE86 RWD sprinter? Might be interested if so.
|
|
|
Location:
Redbank Plains,near Ipswi...
Registered:
May 2002
|
|
Re: 3SG engine
|
Thu, 21 November 2002 10:49
|
|
|
yep. there are a lot of articles on this conmversion. biggest hassle is getting the dissy to clear the bulkhead. simplest conversion is to beat shit out of bulkhead, but if this is not your style, either weld in a modified panel or remove the cap and convert to multi-coil. alternatively, fit a GEN4 crank angle sensor and ditch the dissy all- together. otherwsise, few significant problems. I have mounting plates, sump etc for this. T50 from RA40 or W57 Supra can bolt up. I can walk you thru it OK.
|
|
|
Location:
Melbourne
Registered:
August 2002
|
|
Re: 3SG engine
|
Thu, 21 November 2002 17:17
|
|
out of curious,
so the 3SGE does bolt up to the RA40's T50, but not the Sprinter's T50, rite?
Does the RA40 gearbox bolt in place in a Sprinter gb mounting, tail shaft and shift stick?
anyway, I know someone make convertor for normal dissy to change to DLI, which works with standard ECU.
|
|
|
I supported Toymods
Banned User
Location:
Brisbane
Registered:
May 2002
|
|
Re: 3SG engine
|
Fri, 22 November 2002 08:43
|
|
| pepsicola wrote on Fri, 22 November 2002 03:17 |
anyway, I know someone make convertor for normal dissy to change to DLI, which works with standard ECU.
|
Who? Where? When? How much??
|
|
|
Location:
Melbourne
Registered:
August 2002
|
|
Re: 3SG engine
|
Sun, 24 November 2002 08:47
|
|
i think his name is Anthony Kellam, the convertor itself cost 150 if my memory works. You have to source a DLI setup from 4AGZE etc...
He usually hang around www.4agze.com forum.
Here is his email: akellam@autospeed.com
Good luck.
anyone can give me answer for my questions?
|
|
|
