| Author | Topic |
|---|
Location:
Castle Hill, Sydney
Registered:
February 2004
|
|
3tgte fly on 3tc?
|
Sun, 08 May 2005 07:52
|
 |
a friend gave me a 3tgte clutch which should have plenty of clamping pressure to hold, only thing is it is larger than the stock 200mm 3t clutch.
would a 3tgte flywheel fit inside my 3tc-> T50 bellhousing?
thanks, jesse
|
|
|
Location:
Melbourne, Australia
Registered:
March 2005
|
|
Re: 3tgte fly on 3tc?
|
Sun, 08 May 2005 12:50
|
|
Well...
3T-GT uses W55 from standard in TA63 Celica, etc.
But TA22 conversions often use the T50.
Does the conversion require the flywheel and clutch to be replaced with the T motor flywheel?
Interesting question.
|
|
|
Location:
Castle Hill, Sydney
Registered:
February 2004
|
|
Re: 3tgte fly on 3tc?
|
Sun, 08 May 2005 13:21
|
|
hmmmm, bascially i guess my question is would 3tc and 3tgte ring gears be the same diamater?
and it appears the W and T run different shafts patterns, soooo i guess that means im not going to be able to use this clutch without a W g/b
|
|
|
Location:
Sydney
Registered:
August 2004
|
|
Re: 3tgte fly on 3tc?
|
Sun, 08 May 2005 13:23
|
|
|
pretty sure you have to machine standard flywheel.
|
|
|
