| Author | Topic |
|---|
Location:
Sydney
Registered:
October 2003
|
|
ST185 3SGTE tensioner pulley
|
Fri, 20 May 2005 23:23
|
 |
Hi guys,
After a tensioner pulley and bracket off of a ST185 with air conditioning (smooth type - not ribbed).
Thanks a bunch,
Dave
|
|
|
I supported Toymods
Location:
Perth, Western Australia
Registered:
December 2002
|
|
Re: ST185 3SGTE tensioner pulley
|
Sat, 21 May 2005 01:20
|
|
|
I'll go through my tensioners and see if I have one in good condition for you Dave, will also have a scout around for the aircon bracket, can you give me the compressor part number you want it for please?
|
|
|
Location:
Sydney
Registered:
October 2003
|
|
Re: ST185 3SGTE tensioner pulley
|
Sat, 21 May 2005 04:34
|
|
Thanks Clint,
I should have worded my query better though. I'm after the tensioner bracket off of a model that came with air con. I assume this would be a different bracket to that of one without air con as it needs to tension in the opposite direction.
FYI. a tensioner with ribs is off of a car without air con as it's pushing on the side of the belt with the ribs, a tensioner that is smooth is off of a car with air con as it's on the other side of the belt.
Cheers,
Dave
|
|
|
