Toymods Car Club
www.toymods.org.au
F.A.Q. F.A.Q.    Register Register    Login Login    Home Home
Members Members    Search Search
Toymods » General Car Talk » 'plumb back' BOV for 2nd Gen 3SGTE

Show: Today's Posts  :: Show Polls 
Email to friend  		Switch to threaded view of this topic Create a new topic Submit Reply
AuthorTopic
SilverGhost
Forums Junkie


Location:
Sydney
Registered:
September 2004
'plumb back' BOV for 2nd Gen 3SGTE Tue, 24 May 2005 09:50 Go to next message
Hi All,

Im wondering if anyone has researched installing one of these units and the steps involved.

I have a 2nd Gen 3SGTE with standard intake piping and an ATMO BOV in the standard spot (first bend leading to the top mount IC just after the turbo)

What I want to know is:

1. how much would I be looking at to get one fabricated, or can I fit one from a 3rd Gen 3SGTE or other engine with some mods?

2. would it use the same 'hole' that the atmo BOV is currently using to vent the boost back into the intake?

3. does anyone have a similar setup and could provide me with some pics??

cheers!!
  Send a private message to this user    
Classique71
Forums Junkie


Location:
Colac, Victoria
Registered:
May 2002
Re: 'plumb back' BOV for 2nd Gen 3SGTE Tue, 24 May 2005 12:54 Go to previous message
Ask lance - he had a bosch plumb back on his - and still may - otherwise its just a case of getitng the adaptor provided welded up and piping it in ..

seems fairly straight forward once you get your spring dialed in
  Send a private message to this user    
  Switch to threaded view of this topic Create a new topic Submit Reply
Previous Topic:Better, Or WORSE???
Next Topic:Toyota is the new nissan
Goto Forum:
-=] Back to Top [=-

Current Time: Thu Aug 7 18:00:06 UTC 2025

Total time taken to generate the page: 0.0036909580230713 seconds

Bandwidth utilization bar

.:: Contact :: Home ::.

Powered by: FUDforum 2.3.8
Copyright ©2001-2003 Advanced Internet Designs Inc.